Yet more frivolous purchases, stuff you don't need...

Yet more frivolous purchases, stuff you don't need...

Author
Discussion

Sporky

6,276 posts

64 months

Wednesday 17th April
quotequote all
Some serious chip-pissing going on. Not really in the spirit of the thread,

TGCOTF-dewey

5,173 posts

55 months

Wednesday 17th April
quotequote all
Super Sonic said:
gregs656 said:
Super Sonic said:
Never needs winding. Runs constantly. Will run as long as there's weather. Anything else you can say that about?
It does need winding, it is just wound by converting energy from temperature and pressure changes, instead of a mechanical motion. It is very clever, but it is not a perpetual motion machine and it will not run for ever - it will need servicing otherwise like all other mechanical time keeping devices friction will get the better of it.

Also don't need to spending anything like 10k on one for the other poster, they've been in production a long time and can be had quite cheaply.


Edited by gregs656 on Wednesday 17th April 17:36
I did not say it was a perpetual motion machine.
That would be a new born baby. Sometimes 5 or 6 a day...every day cry

DodgyGeezer

40,501 posts

190 months

Saturday 20th April
quotequote all



be warned it's probably the most annoying website I've seen in many years (Japanese with pop-ups galore)

https://camshop.jp/?mode=srh&sort=n&cid=&a...

blingybongy

3,875 posts

146 months

Saturday 20th April
quotequote all
DodgyGeezer said:



be warned it's probably the most annoying website I've seen in many years (Japanese with pop-ups galore)

https://camshop.jp/?mode=srh&sort=n&cid=&a...
Even Brave Browser couldn't cope with that mess of a site.

gtidriver

3,349 posts

187 months

Saturday 20th April
quotequote all
Very Frivolous and definitely stuff I didn't need, It's taken a while and a lot of money but ive completed my Woodpeckers Tool wall aka the red wall of financial ruin. And yes they all will get used, and cleaned and put back it their correct places.. just need to paint the mdf back board and its done. Im going Festool systainer grey


gtidriver

3,349 posts

187 months

Sunday 21st April
quotequote all

gtidriver

3,349 posts

187 months

Sunday 21st April
quotequote all
This ad comes up, it's as if it knows me.

Yes I know two are missing, axminster run out so I need to wait till more are available at my local store

MadCaptainJack

673 posts

40 months

Sunday 21st April
quotequote all
gtidriver said:
And yes they all will get used…
I question the frivolity of a set of tools that will get used!

gtidriver

3,349 posts

187 months

Sunday 21st April
quotequote all
MadCaptainJack said:
gtidriver said:
And yes they all will get used…
I question the frivolity of a set of tools that will get used!
Mainly just looking nice though. smile

hidetheelephants

24,426 posts

193 months

Tuesday 23rd April
quotequote all
A flamethrowing robot dog. This is obviously fine. rofl



Apologies for the broken link, should work now.

Edited by hidetheelephants on Wednesday 24th April 14:02

geeks

9,196 posts

139 months

Wednesday 24th April
quotequote all
hidetheelephants said:
A flamethrowing robot dog. This is obviously fine. rofl

For some reason your link was broken, here is another, what a thing! hehe

https://arstechnica.com/gadgets/2024/04/you-can-no...

Ah also your link has a spurious ] in it between unhinged and flamethrowing robot dog!

C5_Steve

3,091 posts

103 months

Wednesday 24th April
quotequote all
geeks said:
For some reason your link was broken, here is another, what a thing! hehe

https://arstechnica.com/gadgets/2024/04/you-can-no...

Ah also your link has a spurious ] in it between unhinged and flamethrowing robot dog!
Is it wrong that I don't even think $10k is an unreasonable amount?? rofl

(I see the "base" version is only $1,600 sans flamethrower. Now that is a bit of a bargain for a robot dog)

geeks

9,196 posts

139 months

Wednesday 24th April
quotequote all
C5_Steve said:
geeks said:
For some reason your link was broken, here is another, what a thing! hehe

https://arstechnica.com/gadgets/2024/04/you-can-no...

Ah also your link has a spurious ] in it between unhinged and flamethrowing robot dog!
Is it wrong that I don't even think $10k is an unreasonable amount?? rofl

(I see the "base" version is only $1,600 sans flamethrower. Now that is a bit of a bargain for a robot dog)
Not at all, I was actually sat here thinking "Wow thats surprisingly cheap!"

Filibuster

3,161 posts

215 months

I just bought this:



It's a 1st gen P226 X-Five and I don't really need another gun... I might sell off a substantial part of my collection, which would then not make this purchase not frivolous wink

SpydieNut

5,801 posts

223 months

Now that’s lovely smokin - very envious here in the UK

C5_Steve

3,091 posts

103 months

Filibuster said:
I just bought this:



It's a 1st gen P226 X-Five and I don't really need another gun... I might sell off a substantial part of my collection, which would then not make this purchase not frivolous wink
I know very little about guns (UK based) but that is a lovely piece.

Zetec-S

5,880 posts

93 months

C5_Steve said:
Filibuster said:
I just bought this:



It's a 1st gen P226 X-Five and I don't really need another gun... I might sell off a substantial part of my collection, which would then not make this purchase not frivolous wink
I know very little about guns (UK based) but that is a lovely piece.
+1

geeks

9,196 posts

139 months

Zetec-S said:
C5_Steve said:
Filibuster said:
I just bought this:



It's a 1st gen P226 X-Five and I don't really need another gun... I might sell off a substantial part of my collection, which would then not make this purchase not frivolous wink
I know very little about guns (UK based) but that is a lovely piece.
+1
I know enough to know what a nice hand gun that is. If I were into guns and lived somewhere where they were allowed, it's definitely one I would have

RammyMP

6,784 posts

153 months

ChemicalChaos said:
madbadger said:
GuyW said:
madbadger said:
Quite frivolous. Don’t need an expensive cool box as it is only about 8° today. Partial to orange stuff though.
Absolutely love Yeti! It's a slippery slope. I picked up a Tundra 45 in Camp Green, then a few bottles & tumblers, a cool bag and now they've released Agave as a colour.

I'd recommend getting their ice blocks. To supplement normal ice when filling it.
I have a couple of the 900g blocks. Seem pretty solid. Also been hording ice cubes in a ziplock bag. I know you can buy premade ice, but that seems a bit frivolous. smile
Sure, Yeti stuff is good - but is it certified Bear Proof like this one I saw in Walmart last year? hehe

Not in the same league but I bought an Igloo cooler from Costco about 5 years ago, it’s sat in the garage, I don’t think I’ve ever used it!



…I bet it’s full of spiders!

RammyMP

6,784 posts

153 months

RammyMP said:
ChemicalChaos said:
madbadger said:
GuyW said:
madbadger said:
Quite frivolous. Don’t need an expensive cool box as it is only about 8° today. Partial to orange stuff though.
Absolutely love Yeti! It's a slippery slope. I picked up a Tundra 45 in Camp Green, then a few bottles & tumblers, a cool bag and now they've released Agave as a colour.

I'd recommend getting their ice blocks. To supplement normal ice when filling it.
I have a couple of the 900g blocks. Seem pretty solid. Also been hording ice cubes in a ziplock bag. I know you can buy premade ice, but that seems a bit frivolous. smile
Sure, Yeti stuff is good - but is it certified Bear Proof like this one I saw in Walmart last year? hehe

Not in the same league but I bought an Igloo cooler from Costco about 5 years ago, it’s sat in the garage, I don’t think I’ve ever used it!



…I bet it’s full of spiders!
Just to add, I’ve got 4 cooler boxes, I only ever use the smallest one as it’s easy to fit in the car boot.