Fitting measurment help
Discussion
Looking for a bit of help with measuring some fitments that i'll need to get replacements for.
Of course im not expecting you to tell me what size they are from the images however it would be helpful is someone could show me what measurements I need in order to buy some replacements.
I guess i'll need thread pitch, thread diameter and host fitting diameter? Also the name of this type of fitting would help
Of course im not expecting you to tell me what size they are from the images however it would be helpful is someone could show me what measurements I need in order to buy some replacements.
I guess i'll need thread pitch, thread diameter and host fitting diameter? Also the name of this type of fitting would help
Cheers guys
Ordered some 3/8" x 8mm and 4mm fittings and will go about re-drilling and tapping the holes. As you can see from the smaller fitting it was cross threaded pretty badly but it seems the threads on the Inlet manifold that these go in to were pretty bad in the first place.
Ordered some 3/8" x 8mm and 4mm fittings and will go about re-drilling and tapping the holes. As you can see from the smaller fitting it was cross threaded pretty badly but it seems the threads on the Inlet manifold that these go in to were pretty bad in the first place.
Edited by Samjeev on Friday 15th April 10:21
Gassing Station | Home Mechanics | Top of Page | What's New | My Stuff