Custom stainless exhausts, South London and surrounding.
Discussion
Chaps - very quickly, any recommendations for custom stainless exhaist fabricators and fitters - either in/around the M25 south east/South West London?
I am going to see Powerflow in Bromley on Saturday - but they are really semi-bespoke. Know of anyone fully bespoke in the area?
I went to see someone in Ashford while I was down there looking at a car (Zero Exhausts). Nice chap, but too far away for convenience, and pretty pricey for what I wanted (£700 - I think he saw the car and just decided I'd pay loads just for the hell of it!).
Job is to replace the two side exit silencers (they sit under the running boards) on a Morgan Aero 8 with smaller, lighter and louder stainless items.
Any help appreciated.
I am going to see Powerflow in Bromley on Saturday - but they are really semi-bespoke. Know of anyone fully bespoke in the area?
I went to see someone in Ashford while I was down there looking at a car (Zero Exhausts). Nice chap, but too far away for convenience, and pretty pricey for what I wanted (£700 - I think he saw the car and just decided I'd pay loads just for the hell of it!).
Job is to replace the two side exit silencers (they sit under the running boards) on a Morgan Aero 8 with smaller, lighter and louder stainless items.
Any help appreciated.
Hayward & Scott
11, Nobel Square
Burnt Mills Industrial Estate
Basildon
Essex
SS13 1LS
Tel: 01268 727256
http://www.haywardandscott.com
11, Nobel Square
Burnt Mills Industrial Estate
Basildon
Essex
SS13 1LS
Tel: 01268 727256
http://www.haywardandscott.com
These guys have a good reputation in many circles and are not too far from the M25 in Essex.
http://www.haywardandscott.com/
Only problem is you will be in close contact with Basildon and it's associated inter-breds
http://www.haywardandscott.com/
Only problem is you will be in close contact with Basildon and it's associated inter-breds
My exhaust is from Powerflow in Bromley according to the paperwork. Fits well, no leaks or sagging and isn't horribly loud. Having said that the car is in a slightly lower league than yours
AMD tuning in Thurrock (next to Ikea - argh) do Miltek stuff and I believe they do custom fit jobs. Used them for tracking and alignment and if that's anything to go by they were very professional and friendly and did a perfect job.
AMD tuning in Thurrock (next to Ikea - argh) do Miltek stuff and I believe they do custom fit jobs. Used them for tracking and alignment and if that's anything to go by they were very professional and friendly and did a perfect job.
To be honest, I am not that bothered about a semi-bespoke system. As long as it is of a decent quality, sounds good and fits well, I'll be happy. Frankly, the standarsd Morgan side exhaust is rubbish - poor quality, no character whatsoever, and weighs a tonne. And their prices for custom cat back systems are laughable.
A Powerflow would be an improvement, and I am not about to spend £700 on a pair of silencers just because they are fully bespoke unless there is a real step up in quality - that's just silly.
Chap up north did the job for another Aero owner for £300, and fit, quality and result were great. Trouble is, that's in Rotherham. I'm not going to Rotherham.
A Powerflow would be an improvement, and I am not about to spend £700 on a pair of silencers just because they are fully bespoke unless there is a real step up in quality - that's just silly.
Chap up north did the job for another Aero owner for £300, and fit, quality and result were great. Trouble is, that's in Rotherham. I'm not going to Rotherham.
Another recommendation for Hayward & Scott. I have one of their systems on the 911...and it's beautifully made and sounds great*
As I live in Jersey I didn't have to go to Basildon and let DHL go there for me!
As I live in Jersey I didn't have to go to Basildon and let DHL go there for me!
- The car has been away for 14 months being re-buolt and I suspect the exhaust may be too loud / I'm getting too old / I'm not used to it. It was my choice that it be as loud as it is though...
-Ad- said:
Solid Fabrications in Brixton.
Not used them myself but come very highly rated.
This is around the corner from me (I'm Dulwich) - will definitely look them up.Not used them myself but come very highly rated.
ETA - just spoke to Alan at Solid Fabrications, very nice chap, said to pop in and have a chat. Shall do - 10 minutes' drive. Shall also speak to Powerflow in Bromley, to get a sense of pricing/bespoke levels of work.
Edited by Harry Flashman on Tuesday 19th June 14:27
Grey Ghost said:
These guys have a good reputation in many circles and are not too far from the M25 in Essex.
http://www.haywardandscott.com/
Only problem is you will be in close contact with Basildon and it's associated inter-breds
as a basildon pistonhead, i resemble this remark.http://www.haywardandscott.com/
Only problem is you will be in close contact with Basildon and it's associated inter-breds
chilistrucker said:
Grey Ghost said:
These guys have a good reputation in many circles and are not too far from the M25 in Essex.
http://www.haywardandscott.com/
Only problem is you will be in close contact with Basildon and it's associated inter-breds
as a basildon pistonhead, i resemble this remark.http://www.haywardandscott.com/
Only problem is you will be in close contact with Basildon and it's associated inter-breds
Powerflow in Brimley is local to me (about a mile or so from my house) and we went there to investigate getting a more raspy exhaust fitted to the 944. From hat I remember they first asked on a scale of 1-10 how loud do you want it? Bit difficult without knowing where it is on the scale lol. Out when priced up for a whole system it wasn't too bad.
Gassing Station | General Gassing | Top of Page | What's New | My Stuff