Best of the Bargain Basement Vol. 2
Discussion
W00DY said:
Love this, would be tempted if it were closerIf any PHers in the south east are interested, I know this 2002 Civic 1.6 could be had for £350.
It's not perfect by any means, but drives well and has MOT until the end of November. Has recently had a new driveshaft. ABS light is on but I think this was due to it being towed with a snapped driveshaft with the engine on so it probably just needs the codes cleared.
It's not perfect by any means, but drives well and has MOT until the end of November. Has recently had a new driveshaft. ABS light is on but I think this was due to it being towed with a snapped driveshaft with the engine on so it probably just needs the codes cleared.
http://www.autotrader.co.uk/classified/advert/2015...
At least they're honest. Shirley has higher scrap value?
At least they're honest. Shirley has higher scrap value?
I'm sure she does have a higher value
Ste1987 said:
http://www.autotrader.co.uk/classified/advert/2015...
At least they're honest. Shirley has higher scrap value?
At least they're honest. Shirley has higher scrap value?
timolloyd said:
I'm sure she does have a higher value
That's probably what it scraps for at a scrapyard, the price of metal has come down a lot in the last 6 monthsSte1987 said:
http://www.autotrader.co.uk/classified/advert/2015...
At least they're honest. Shirley has higher scrap value?
At least they're honest. Shirley has higher scrap value?
Nice use of duct-tape there
Ste1987 said:
http://www.autotrader.co.uk/classified/advert/2015...
At least they're honest. Shirley has higher scrap value?
I like how he still photoshopped the background, in case anyone might be put off by his real location!At least they're honest. Shirley has higher scrap value?
Impressively shedtastic.
The Spruce goose said:
There are not many cars sub 1k that do 40mpg easily and have 180bhp, 300lb torque.
This is my third one I like working on pegeuots and this engine responds well to a remap. I can do it myself for 100 quid which I might do but there is a guy on a forum that does a job lot for 300 quid.
Not a bad buy for £500, I had a 406 coupe with the same engine and had it remapped and removed the EGR and DPF myself, it made such a difference.This is my third one I like working on pegeuots and this engine responds well to a remap. I can do it myself for 100 quid which I might do but there is a guy on a forum that does a job lot for 300 quid.
If you are anywhere near Gloucestershire then I have the diagnostics kit for this, but it sounds like you may well have it already. Also a user called 'Finchy' on the 406 coupe club is the guy who did the remap on mine. He may well be the guy you are on about in your post above!
yep that is the guy. I am not sure thou a hdituning offer a good remap and I can DIY the remap, done it before.
I also had a 2.2 hdi coupe which was a good car, this 406 is not without faults. The ride is a bit bouncy and turbo is very loud, but having been away from these cars I am not sure yet.
the 2.2 hdi is a dying breed due to all the complexities.
I also had a 2.2 hdi coupe which was a good car, this 406 is not without faults. The ride is a bit bouncy and turbo is very loud, but having been away from these cars I am not sure yet.
the 2.2 hdi is a dying breed due to all the complexities.
Anyone for a sheddy but seemingly intact and straight E38 735i?
£650 for that looks a bit of a bargain. A few spots of rust and it's on less flashy, smaller wheels now, but it's a lot of car for the money.
£650 for that looks a bit of a bargain. A few spots of rust and it's on less flashy, smaller wheels now, but it's a lot of car for the money.
GeordieInExile said:
Anyone for a sheddy but seemingly intact and straight E38 735i?
£650 for that looks a bit of a bargain. A few spots of rust and it's on less flashy, smaller wheels now, but it's a lot of car for the money.
Erm...£650 for that looks a bit of a bargain. A few spots of rust and it's on less flashy, smaller wheels now, but it's a lot of car for the money.
I'm going to say that there's a bit of an offset issue...
Gassing Station | General Gassing | Top of Page | What's New | My Stuff