AFM Connector wiring

[blaze_away]

On the connector that plugs into the AFM can anyone confirm the wiring order.

ie standing beside the nearside wing what order from left to right should they be ?

The wires are
Red/black - ground
Blue/green - afm signal
Brown/orange - 12v
Blue/red - CO Trim

[jojackson4]

Will get it tomorrow

[Steve_D]

blaze_away said:

On the connector that plugs into the AFM can anyone confirm the wiring order.

ie standing beside the nearside wing what order from left to right should they be ?

The wires are
Red/black - ground
Blue/green - afm signal
Brown/orange - 12v
Blue/red - CO Trim

Red/black - ground...........Pin2
Blue/green - afm signal.....Pin3
Brown/orange - 12v...........Pin5
Blue/red - CO Trim............Pin6

Steve

[blaze_away]

Cheers guys

Peter - I would appreciate confirmation on Steves info as I dont know which direction pins are numbered from.

Steve thats really useful info. For my future knowledge banks do you know where or even if the pins are numbered. Or is there some sort of rule for these connectors ?

[stevesprint]

[Steve_D]

In the picture supplied by Stevesprint look for the word SIG and the rounded ridges it is on.
On one side of the connector each of those ridges has a pin number in the moulding.

Steve

[FoxTVR430]

Hi,
Here is my wiring for the AFM on my 93', hope it will help

[jojackson4]

As above

From left to right
Miss
Red/ black
Blue/ green
Miss
Brown /orange
Blue/red
Hope it makes sense

[blaze_away]

Fabulous guys thank you. I can now rewire mine with its new "junior" connector and do some tests too make sure everything is ok.