On a cylinder head removal, do you have to drain the coolant

On a cylinder head removal, do you have to drain the coolant

Author
Discussion

cahami

1,248 posts

207 months

Saturday 25th December 2010
quotequote all
Amazedsmashsmashsmash

mrtwisty

3,057 posts

166 months

Sunday 26th December 2010
quotequote all
This might be a little late, but if you've not done it yet I would recommend spending some time on the net researching this job (there's always someone who's done it before and written a piece on it, and as mentioned earlier haynes can be very hit and miss). No offence, but if you need to ask that original question you might be biting off more than you can chew.

PoleDriver

28,649 posts

195 months

Sunday 26th December 2010
quotequote all
Acheron said:
The Haynes manual is telling me to drain the coolant, however its only instruction is 'remove the hose from the left of the radiator'.

There's no diagram, no picture, no in depth location for this, it doesnt even say left as you look to the car or left as youre sat in it.

I cant find the elusive hose anywhere, does it make a difference if it is not drained off?

2.2 Vectra B.
If you need to ask this question you should not really be taking off the cylinder head!

Larry Dickman

3,762 posts

219 months

Sunday 26th December 2010
quotequote all
mrtwisty said:
This might be a little late, but if you've not done it yet I would recommend spending some time on the net researching this job (there's always someone who's done it before and written a piece on it, and as mentioned earlier haynes can be very hit and miss). No offence, but if you need to ask that original question you might be biting off more than you can chew.
Good advise.

CraigyMc

16,438 posts

237 months

Sunday 26th December 2010
quotequote all
PoleDriver said:
If you need to ask this question you should not really be taking off the cylinder head!
I'm in two minds about this.
  • Either OP knows what he is doing and is asking a question to see how other do it, or
  • OP is about to remove himself from the roads, which under the circumstances seems to be a good thing.
Either way is fine by me.

C

Carrot

7,294 posts

203 months

Sunday 26th December 2010
quotequote all
Have you got a mechanically minded mate (not like an Ry_B mate obviously - a real one hehe ) who can give you some pointers while you are doing it?

When I did the brakes on my car for the first time, I also followed a haynes manual, but had a mate who is a mechanic to watch and step in if I was about to do something wrong - best way to learn IMO (and safest)

IforB

9,840 posts

230 months

Sunday 26th December 2010
quotequote all
PoleDriver said:
Acheron said:
The Haynes manual is telling me to drain the coolant, however its only instruction is 'remove the hose from the left of the radiator'.

There's no diagram, no picture, no in depth location for this, it doesnt even say left as you look to the car or left as youre sat in it.

I cant find the elusive hose anywhere, does it make a difference if it is not drained off?

2.2 Vectra B.
If you need to ask this question you should not really be taking off the cylinder head!
^^^^^This.

busta

4,504 posts

234 months

Sunday 26th December 2010
quotequote all
Biker's Nemesis said:
CraigyMc said:
davepoth said:
I'd collect the coolant anyway - It'll freeze this evening if it goes on the driveway, which won't be fun.
? I'd have thought it wouldn't freeze. It shouldn't anyway!
Are you saying anti freeze doesn't freeze.
So people are more concerned about it being a bit skiddy than the fact that anti-freeze is pretty nasty stuff and if you just let it run down a drain it's going to make the fish have 3 eyes?