Final inspection plate

[TBW]

After being a bit fed up with my rusty looking final inspection plate i decided to risk polishing it. Took some Autosol metal polish and gave it a good going over. Came up a treat. Just removed the surface rust from the engraved lettering and cleaned up the plate nicely too.

Edited by TBW on Sunday 30th April 16:33

Edited by TBW on Sunday 30th April 16:34

Edited by TBW on Sunday 30th April 16:37

[Frances The Mute]

Nice result.

Did you do it by hand or with a polishing machine?

[TBW]

By hand. Didn't take long. Now to do the exhaust tips!