991.2 GT3 RS batch '2' GPF?
Discussion
Cheib said:
Taffy66 said:
That’s the Aston Martin Green one ?Juno said:
Yeh Lizard Green ones look st,you’d need to be Stevie Wonder to order LG,even worse with Green vents
I really like LG although too brash for some tastes, the dark green in the pic is a classier more understated hue which will appeal to a wider audience IMO..I'm really starting to show my age.A1mjb said:
That looks spot on enjoy your car
What carbon bits did you go for in the end
Front bumper spearsWhat carbon bits did you go for in the end
NACA ducts
Front Fender Vents
Side Air Intakes
I am also considering:
1) Having the front lip and side skirts painted
2) Having the wheels refinished. I requested GT2 RS White Gold for the wheels but it came with what’s i think is Satin Platinum.
BrntRubber said:
A1mjb said:
That looks spot on enjoy your car
What carbon bits did you go for in the end
Front bumper spearsWhat carbon bits did you go for in the end
NACA ducts
Front Fender Vents
Side Air Intakes
I am also considering:
1) Having the front lip and side skirts painted
2) Having the wheels refinished. I requested GT2 RS White Gold for the wheels but it came with what’s i think is Satin Platinum.
Did you go to DB Carbon in the end
For your bits ?
I’ve been told front fender vents are
Glued in and it’s a tough job to remove them
Be interesting to hear how you get on swapping these over if they are 1 piece item
There are some vents covers you can glue on the existing louvres from tech art not
Sure how good the finish on these would
Look
Anyone fitted these ?
A1mjb said:
BrntRubber said:
A1mjb said:
That looks spot on enjoy your car
What carbon bits did you go for in the end
Front bumper spearsWhat carbon bits did you go for in the end
NACA ducts
Front Fender Vents
Side Air Intakes
I am also considering:
1) Having the front lip and side skirts painted
2) Having the wheels refinished. I requested GT2 RS White Gold for the wheels but it came with what’s i think is Satin Platinum.
Did you go to DB Carbon in the end
For your bits ?
I’ve been told front fender vents are
Glued in and it’s a tough job to remove them
Be interesting to hear how you get on swapping these over if they are 1 piece item
There are some vents covers you can glue on the existing louvres from tech art not
Sure how good the finish on these would
Look
Anyone fitted these ?
Taffy66 said:
I've asked my dealer about repainting my RSs Mag rims and he told me today no one will do the rears due to the size i think..
Think they can be painted, but from what i was told due to the Mag wheels, you can take a Light wheel to a darker Colour, ie Gold to Black, but not the other way round. I was going to take my gold wheels on my 2RS to black, but was told if i do this and don't like it they can not be put back to gold.Porsche guy said:
Yes front vents are bonded in and a veneer on top of the existing ones are the only option, unless you want to take the wings off and butcher them!
I' m going to fit some carbon bits to my RS when it comes..I especially dislike the rear plastic air inlets which look cheap on a WP RS..These simply pop off and are very easy to replace..The front fender vents are very difficult to remove and if the whole parts are replace will necessitate removing the front wings..However DB Carbon offer an alternative which is just replacing the vent slats only, leaving the bonded frames in place..These can be replaced without fender removal or so i've been told.APOLO1 said:
Think they can be painted, but from what i was told due to the Mag wheels, you can take a Light wheel to a darker Colour, ie Gold to Black, but not the other way round. I was going to take my gold wheels on my 2RS to black, but was told if i do this and don't like it they can not be put back to gold.
i know of a guy who also wants to do the same ie change his 2RS's rims from Gold to Black..He can't find anyone to do it..Can you let me know the contact details of your paintshop so i can let him know..thanks in advance.Taffy66 said:
i know of a guy who also wants to do the same ie change his 2RS's rims from Gold to Black..He can't find anyone to do it..Can you let me know the contact details of your paintshop so i can let him know..thanks in advance.
Yea, lots don't like to paint Magnesium wheels. I will ask the OPC which paint shop they were going to use and revert.Taffy66 said:
I' m going to fit some carbon bits to my RS when it comes..I especially dislike the rear plastic air inlets which look cheap on a WP RS..These simply pop off and are very easy to replace..The front fender vents are very difficult to remove and if the whole parts are replace will necessitate removing the front wings..However DB Carbon offer an alternative which is just replacing the vent slats only, leaving the bonded frames in place..These can be replaced without fender removal or so i've been told.
Yes I'm looking to replace my rear vents which just pull out with a bit of effort, as I agree the standard ones look naff and spoil the car!A1mjb said:
Some sounds posted on rennlist
I hope the first one is in transport mode !!
I've heard from someone who has been party to an exhaust comparison between the new PF car and the non PF car, and his verdict is the new car is quieter on 'off' exhaust setting, but louder with the 'on' setting.I hope the first one is in transport mode !!
Haven't heard them myself, but I've no reason to doubt his hearing and impartiality.
Sandy59 said:
A1mjb said:
Some sounds posted on rennlist
I hope the first one is in transport mode !!
I've heard from someone who has been party to an exhaust comparison between the new PF car and the non PF car, and his verdict is the new car is quieter on 'off' exhaust setting, but louder with the 'on' setting.I hope the first one is in transport mode !!
Haven't heard them myself, but I've no reason to doubt his hearing and impartiality.
They must have more control with the
electronic adjustable exhaust valves
When do you pick yours up ?
Just post a little video of 9k revs !!
Gassing Station | 911/Carrera GT | Top of Page | What's New | My Stuff