997 GT3 CS/RS Floor

[Dec ROW]

I'm living in the US and have made the decision I want to upgrade my US 997 GT3 to the ROW only optional Clubsport Pack. I've just picked up the CS/RS seats and rollbar and also have the CS/RS carpet on order. What I don't have is pictures or part numbers of what changes were made to the CS/RS floor for harness sub belt mounts and front and rear rollbar mounts. I know there are multiple aftermarket options, I'm only looking for information on what the factory did with these cars. Any insight would be appreciated.

[Pip1968]

Captive bolts need to be put in the front footwell and additionally behind the seats to get the cage in. As the rear most part of the cage is attached to the top of the rear suspension struts, that should enable you to get the correct placement for the captive bolts' location.

Pip

[Dec ROW]

In order for the rollbar to be DBMS (German motorsport) compliant it has to have plates welded to the floor inside the car to spread the load in case of rollover. I have 1 picture of what the rear rollbar mounts like. Does anyone have more pictures? The front rollbar mount and extinguisher mount would be extremely helpful.

[Dec ROW]

Any insight?

[D.no]

I have a comfort-spec car so not much help I'm afraid.

You can get the OEM mounting plates here:
https://www.fvd.net/us-en/99658098299/clubsport-co...