964 wishbone bushes front

964 wishbone bushes front

Author
Discussion

Pesty

Original Poster:

42,655 posts

257 months

Saturday 11th July 2015
quotequote all
I'm taking mine for alignment/ ego soon but I just realised a project I was going to do about 10 years ago and never finished or should I say started. As alignment would need to be done I think after fitting it's probably a good idea to do it now before I take it.

I have a spare pare of front wishbones used, I was going to relish them ( car was an every day driver at the time and I thought it easier to do it on a spare set)

I seem to remember not starting because it seems a bit too involved. Anybody here re bushed the front wishbones?

ffc

613 posts

160 months

Sunday 12th July 2015
quotequote all
I've done this, the most difficult part is the removal of the existing bushes for which you just need persistence. These were the worst ones, I can't remember if they were front or rear:






Pesty

Original Poster:

42,655 posts

257 months

Sunday 12th July 2015
quotequote all
Is it just a case of smashing the old ones out with a hammer?

ffc

613 posts

160 months

Sunday 12th July 2015
quotequote all
Pesty said:
Is it just a case of smashing the old ones out with a hammer?
Effectively yes. I lifted the edging with an old chisel and then used a cold chisel once I had something to work with. The other bushes needed the sleeves to be sawn thorough carefully and then bashed out. There are a few threads on rennlist and 911uk about how to do it.

Warmfuzzies

3,990 posts

254 months

Tuesday 14th July 2015
quotequote all
ffc said:
Pesty said:
Is it just a case of smashing the old ones out with a hammer?
Effectively yes. I lifted the edging with an old chisel and then used a cold chisel once I had something to work with. The other bushes needed the sleeves to be sawn thorough carefully and then bashed out. There are a few threads on rennlist and 911uk about how to do it.
Bit of a blow torch as well, IIRC.

I used Chris Walrod bushes to replace my old ones.


K

Pesty

Original Poster:

42,655 posts

257 months

Tuesday 14th July 2015
quotequote all
Thanks just googled that name and found a tutorial. I'll order a set.

The wishbones I have are supposed to be RS items I assume the diameter of the bushes are the same.

Wozy68

5,392 posts

171 months

Tuesday 14th July 2015
quotequote all
I would have thought the RS versions the same as the standard wishbone but with harder rubber.

Give it up now and order a set of refurb wishbones from Hartech. I've just received mine and they will give me dosh back for my old ones. I've heard DIY can be a right pain.

At £130 each plus VAT (then money back for the old stuff) I cant see it worth buying the bushes and the hassle of doing your own.

Pesty

Original Poster:

42,655 posts

257 months

Tuesday 14th July 2015
quotequote all
Another interesting option. I take it they use upgraded bushes not original.