Ferrari 488 exhaust flaps

Ferrari 488 exhaust flaps

Author
Discussion

BasilBrush58

Original Poster:

26 posts

159 months

Tuesday 19th October 2021
quotequote all
Hi
Regarding the opening of exhaust flaps should the Manettino switch alter the RPM that the flaps open?
My car starts up with flaps open for a short period then open again at 3500RPM in sport mode, when I switched to Race mode I never noticed any change in opening RPM.
A friend of mine has a 458 and his exhaust flaps remain open all the time when he selects Race Mode?
Thanks for any help you can give me.

Edited by BasilBrush58 on Tuesday 19th October 06:54

Dal65

165 posts

83 months

Wednesday 20th October 2021
quotequote all
Hi , 3500 in sport & 2800 race & open all the time if you pull the vacuum pipes off & plug them , which is the cheapest exhaust upgrade on a 488. You can get lol

BasilBrush58

Original Poster:

26 posts

159 months

Thursday 21st October 2021
quotequote all
Thanks for that info
Mike

stimshady

1,323 posts

188 months

Saturday 23rd October 2021
quotequote all
Dal65 said:
Hi , 3500 in sport & 2800 race & open all the time if you pull the vacuum pipes off & plug them , which is the cheapest exhaust upgrade on a 488. You can get lol
How is this done please?

In the Aston I just pulled a fuse to stop them closing.

Dal65

165 posts

83 months

Saturday 23rd October 2021
quotequote all
Hi , drop the rear under tray 8 bolts , don’t need to Jack car up
Un plug DRS & fog light cables & move to one side . Look up u can see the bypass valves on the side of each exhaust pipes , pull the small blue tubes off , plug the pipes with 4/5mm short machine screws . Job done then just Put it all back

stimshady

1,323 posts

188 months

Sunday 24th October 2021
quotequote all
Dal65 said:
Hi , drop the rear under tray 8 bolts , don’t need to Jack car up
Un plug DRS & fog light cables & move to one side . Look up u can see the bypass valves on the side of each exhaust pipes , pull the small blue tubes off , plug the pipes with 4/5mm short machine screws . Job done then just Put it all back
Nice. Thanks.