Diablo Alarm Problem

[Rocco1]

Hi guys
After having a drive out in the SV it was time to lock and arm the alarm but when it came to arming the alarm i held the arm button for too long which enabled the panic siren to go off.Once the alarm stopped screaming the SV would not start up . So i used the spare fob which sorted out the problem,the problem now is i only have one fob that works the other has lost its code
The alarm is a Serpi Star and the company is no more
So what Cat 1 alarm would you guys recommend?
Thank you

[Sudesh]

You may be able to recover your code, I've seen it done on various other makes of fobs

I found this:

http://www.abacuscaralarms.co.uk/alarms/serpi_star...

[Rocco1]

Sudesh said:

You may be able to recover your code, I've seen it done on various other makes of fobs

I found this:

http://www.abacuscaralarms.co.uk/alarms/serpi_star...

Thank you
I managed to track down the technician who actually installed the alarm some 17 years ago and had an in depth conversation about my problem but in the end no positive result other than use the spare fob or replace the alarm
I was told Sigma S30 Cat 1 alarm will be up to task
Anyone used Sigma S30 Cat1 alarm system??