Convex Interior Mirror for IVA wanted

[finishing touch]

Hi All,

I'm in need of an interior mirror that will fix (sticky pads) to the top of the screen or bolt to the ally frame.

Something 150 to 250mm wide would be good. Any smaller and I'll have field of view problems, hence convex,

and any bigger it will just look silly as my car is a seven-alike and is narrow anyway.

Also rounded corners and no sharp edges as the IVA is looming.



Many thanks in anticipation,
Paul G

[Steve_D]

Car Builder Solutions have a good range.
Here's one that mounts to top of dash.
http://www.carbuildersolutions.com/uk/race-style-i...

Steve

[finishing touch]

Steve_D said:

Car Builder Solutions have a good range.
Here's one that mounts to top of dash.
http://www.carbuildersolutions.com/uk/race-style-i...

Steve

Hi Steve and thanks for the reply.

It needs to be a little wider and I'm not sure if carbon would look right on the car as it's aluminium.

As I have a bit of a shakedown to do prior to IVA I have a flat one fitted just for the time being. It's the same one as CBS MINT3
but was on clearance offer at Halfords for £2. If only it had a bit of curve.
I'll keep looking, something will turn up.

http://www.halfords.com/motoring/iterior-accessori...

Cheers,
Paul G

Edited by finishing touch on Sunday 23 November 06:26

Edited by finishing touch on Sunday 23 November 06:28