New Prototype Kit Car...
Discussion
Hello Everyone…
I am in the process of building a new Prototype kit car and just wanted to get some feed back on what everyone thinks. I plan to make a US and UK version. I am in the process of building the body buck now and plan to have molds made sometime in the beginning of 08.
Well any thoughts, feedback or ideas are welcomed.
Also if anyone know of a good supplier of Round LED Taillights that would be helpful. I have been looking at a few but there just is not that great of a selection out there. Really looking for something unique but simple in design.
I started a thread in the General section but can’t seem to get it moved to the Kit Car forum. So I am starting a new thread here, hope that’s ok. Here is the link to the other post if you want to catch up.
http://www.pistonheads.com/gassing/topic.asp?h=0&a...
www.BaileySpeed.com
Here are a few images.
Thanks,
- Neal
I am in the process of building a new Prototype kit car and just wanted to get some feed back on what everyone thinks. I plan to make a US and UK version. I am in the process of building the body buck now and plan to have molds made sometime in the beginning of 08.
Well any thoughts, feedback or ideas are welcomed.
Also if anyone know of a good supplier of Round LED Taillights that would be helpful. I have been looking at a few but there just is not that great of a selection out there. Really looking for something unique but simple in design.
I started a thread in the General section but can’t seem to get it moved to the Kit Car forum. So I am starting a new thread here, hope that’s ok. Here is the link to the other post if you want to catch up.
http://www.pistonheads.com/gassing/topic.asp?h=0&a...
www.BaileySpeed.com
Here are a few images.
Thanks,
- Neal
Edited by BladeX1 on Saturday 3rd November 00:54
Hi Neal,
Seem to remember you asking about light units on here before, but guess you couldn't find anything you liked.
Problem is you're going to have to use 'off the shelf items' that are E-marked to pass SVA in the UK.
Think you've already been pointed at UK parts suppliers like Europa (www.europaspares.com), SVC (www.s-v-c.co.uk) and Car Builder Solutions (www.carbuildersolutions.co.uk).
We do have buses over here with simple round LED light units, which I suspect might be made by Hella, so you could try their web site if you haven't already. Can't think of anything else.
Good luck with the car - nice to see another US kit that isn't a Cobra replica!
Seem to remember you asking about light units on here before, but guess you couldn't find anything you liked.
Problem is you're going to have to use 'off the shelf items' that are E-marked to pass SVA in the UK.
Think you've already been pointed at UK parts suppliers like Europa (www.europaspares.com), SVC (www.s-v-c.co.uk) and Car Builder Solutions (www.carbuildersolutions.co.uk).
We do have buses over here with simple round LED light units, which I suspect might be made by Hella, so you could try their web site if you haven't already. Can't think of anything else.
Good luck with the car - nice to see another US kit that isn't a Cobra replica!
BladeX1 said:
Hey thanks,
Yeah I have visited those sites except for one… where I found some lights of interest. See image.
Anyone know where I can get these in the US?
If you can't sort anything else out you could maybe get a set of those shipped over from the UK for your first car, then when you can see who makes them try and source a US supplier.Yeah I have visited those sites except for one… where I found some lights of interest. See image.
Anyone know where I can get these in the US?
Have you taken a look at these guys............
http://www.maxparts.biz/
they seem to have a large range.
http://www.maxparts.biz/
they seem to have a large range.
Paul Drawmer said:
Looks exciting - where does the door glass go when the window is open?
Hey Paul,The Side Windows will roll down into the door just as any other car does. I am use internal Windows parts from a Mazda Miata. They are very common here in the States as parts are easy to get and cheap.
I will post some more pics this weekend that show the working doors and additional progress.
- Neal
pfedwards said:
Have you taken a look at these guys............
http://www.maxparts.biz/
they seem to have a large range.
Hey thanks, that site has a very comprehensive list of lights. I have seen most of those and will probably go with the Hella versions. I am just researching all my options… I have a few that will work I just want something that is easy to get but a little more unique than what’s available now. http://www.maxparts.biz/
they seem to have a large range.
I spent a lot of time today translating several Chinese and Japanese’s websites looking for something that I might be able to buy in bulk and import to the US. But everything is just too Pokymon and ridiculously cartonish. Oh well…
- Neal
BladeX1 said:
Hello Everyone…
I am in the process of building a new Prototype kit car and just wanted to get some feed back on what everyone thinks. I plan to make a US and UK version. I am in the process of building the body buck now and plan to have molds made sometime in the beginning of 08.
Well any thoughts, feedback or ideas are welcomed.
Neal,I am in the process of building a new Prototype kit car and just wanted to get some feed back on what everyone thinks. I plan to make a US and UK version. I am in the process of building the body buck now and plan to have molds made sometime in the beginning of 08.
Well any thoughts, feedback or ideas are welcomed.
Edited by BladeX1 on Saturday 3rd November 00:54
A nice design, and using the cobra chassis makes a lot of sense, for a front engined v8 coupe/roadster.
Keep it up, and will follow your build closely.
Cheers
Italo
Hey guys…
Ok finally got my doors fully functioning now with hinges and door latches. Also I temporary mounted the Windshield and A-pillars. I also went out and picked up all the weather stripping for the hard top and doors to insure that I had a proper seal and made sure everything was aligned the right way.
Now I can finally finish sculpting the body. I need to re-sculpt the sides onto the new doors but this should go pretty quick as I now have an actual surface to shape the foam on.
Over the past two weeks I have been re-adjusting some of the wood forms as a few got out of alignment when let the car down off the original stand that I made. I ended up using a few lasers that I got from home depot to align everything back up, this worked surprisingly well. The lasers especially came in handy for aligning the windshield to the center of the car.
I am starting to work on interior ideas now too… so if you guys have any ideas that you would like to see let me know. I want to try to merge a Classic and Modern look at the same time with more of the focus going towards classic.
Article from KCB magazine… It’s a simple mention of the project. But seems to be good exposure as I have had a ton of people contact me about it.
Ok finally got my doors fully functioning now with hinges and door latches. Also I temporary mounted the Windshield and A-pillars. I also went out and picked up all the weather stripping for the hard top and doors to insure that I had a proper seal and made sure everything was aligned the right way.
Now I can finally finish sculpting the body. I need to re-sculpt the sides onto the new doors but this should go pretty quick as I now have an actual surface to shape the foam on.
Over the past two weeks I have been re-adjusting some of the wood forms as a few got out of alignment when let the car down off the original stand that I made. I ended up using a few lasers that I got from home depot to align everything back up, this worked surprisingly well. The lasers especially came in handy for aligning the windshield to the center of the car.
I am starting to work on interior ideas now too… so if you guys have any ideas that you would like to see let me know. I want to try to merge a Classic and Modern look at the same time with more of the focus going towards classic.
Article from KCB magazine… It’s a simple mention of the project. But seems to be good exposure as I have had a ton of people contact me about it.
Hmm yeah that might be a little more luxury classic than what I was thinking. I think basically I want to keep it simple and sporty in an old style way. I am not sure what the Roll/Merc interior looks like but I can imagine that there is lot of old birch or birds-eye-maple wood in there. I want to stick to round classics gauges but with modern LED back lighting.
This image is kind of the general shaping that I would like to model after... although it’s quite modern. The way this Porsche interior is, is very much like my current setup. I even have the same clutch/peddle assembly.
This image is kind of the general shaping that I would like to model after... although it’s quite modern. The way this Porsche interior is, is very much like my current setup. I even have the same clutch/peddle assembly.
Gassing Station | Kit Cars | Top of Page | What's New | My Stuff