Vixen S3 ride height and suspension goemetry.
Discussion
I've got as far as putting the wheels on and dropping the chassis on the floor to check tehe geometry.
Looking at the difference in effective length of the lower/upper wishbones, it seems that ride height will be critical in setting up the camber, front and rear.
I can't find any useful chassis ride height settings - does anyone have recommendations?
I'm aiming to setup the camber with the car at a 'normal' height, just by slackening off the springs.
Once the engine/body are on. I will setup the loaded ride height using a basic flat-floor technique.
Any pointers greatly appreciated!
Cheers - Simon
Looking at the difference in effective length of the lower/upper wishbones, it seems that ride height will be critical in setting up the camber, front and rear.
I can't find any useful chassis ride height settings - does anyone have recommendations?
I'm aiming to setup the camber with the car at a 'normal' height, just by slackening off the springs.
Once the engine/body are on. I will setup the loaded ride height using a basic flat-floor technique.
Any pointers greatly appreciated!
Cheers - Simon
Gassing Station | TVR Classics | Top of Page | What's New | My Stuff