1969 tvr vixen wiper arms and blades

[phillpot]

ATE399J said:

where do the seals for spigot through bodywork come from? This for a Vixen Series 3. All of the "usual suspects" I've looked up have an angle on them, ours need to go through perpendicular to the panel.

Adrian @' would be my first "port of call" ........ Exactly TVR


failing that cut some from an old bicycle inner tube

[1969tuscan]

Thanks everyone who replied ,. Andrew I thought it was only GB that had that sort of weather , just come back from Moto GP week end at Silverstone cancelled in the end after makeing us stand in torential rain from 6. In the morning till four thirty , they decided it was to wet to race . Nice u/tube

[plasticpig72]

phillpot said:

Adrian @' would be my first "port of call" ........ Exactly TVR


failing that cut some from an old bicycle inner tube

Or use Tap Washers
Alan

[Andrew Gray]

plasticpig72 said:

Or use Tap Washers
Alan

Stop giving suppliers ideas Alan they will end up being supplied with modification suggestions
A

[plasticpig72]

Alan
Ammended to say "if someone uses one of my ideas i will take it as a compliment."
It is nice to know it's being used and we are getting more pleasure from our classic TVRs

Edited by plasticpig72 on Monday 3rd September 10:05

Edited by plasticpig72 on Monday 3rd September 10:07

[Andrew Gray]

plasticpig72 said:

+1 Andrew,
i wouldn't want that happening again would i.
The truth is i don't mind that BUT i would like recognition when they adopt one of my Brain Waves. My grey matter is disappearing fast ha ha ha.
I've started talking to myself but at least for the moment i get good replies
Alan

Very True i did a blinder with the fuel filler valve that you fitted
A