1969 tvr vixen wiper arms and blades
Discussion
ATE399J said:
where do the seals for spigot through bodywork come from? This for a Vixen Series 3. All of the "usual suspects" I've looked up have an angle on them, ours need to go through perpendicular to the panel.
Adrian @' would be my first "port of call" ........ Exactly TVRfailing that cut some from an old bicycle inner tube
Thanks everyone who replied ,. Andrew I thought it was only GB that had that sort of weather , just come back from Moto GP week end at Silverstone cancelled in the end after makeing us stand in torential rain from 6. In the morning till four thirty , they decided it was to wet to race . Nice u/tube
phillpot said:
Adrian @' would be my first "port of call" ........ Exactly TVR
failing that cut some from an old bicycle inner tube
Or use Tap Washersfailing that cut some from an old bicycle inner tube
Alan
plasticpig72 said:
+1 Andrew,
i wouldn't want that happening again would i.
The truth is i don't mind that BUT i would like recognition when they adopt one of my Brain Waves. My grey matter is disappearing fast ha ha ha.
I've started talking to myself but at least for the moment i get good replies
Alan
Very True i did a blinder with the fuel filler valve that you fitted i wouldn't want that happening again would i.
The truth is i don't mind that BUT i would like recognition when they adopt one of my Brain Waves. My grey matter is disappearing fast ha ha ha.
I've started talking to myself but at least for the moment i get good replies
Alan
A
Gassing Station | TVR Classics | Top of Page | What's New | My Stuff