3000M bits

[zcar]

Now then! Just purchased on old 3000m from down in Southampton and returned it to its birthplace near Blackpool for some TLC. Shes in bits, but I'm pretty happy with the old girl as everything is going back together nicely. Shes had a refurbed chassis by Exactly TVR, a new engine from Specialised Engines, new harness, rebuilt box and diff, rebuilt doors, etc etc. I am however, missing the wiper arms and the hose that connects to the heater box. I understand they are MGA arms, is this correct? And if so, where can I get a set? The hose is the one that swings thru 90 degrees before going towards the front of the car. Any clues would be gratefully appreciated. Nick

[Millard]

I'm using some flexible ducting hose available from most motorsport shops designed for brake cooling etc. its about £15 a meter.

cheers

Alex

[harry1972m]

Hi Nick,

Try this for your hosing I got mine from there for my 1600M

https://secure.visav.co.uk/avshop/products.asp?getcats=true&cat=34&scat=119

or just use the link below and go to the heater section on the left then hosing.

www.europaspares.com/

Cheers
Graham

>> Edited by harry1972m on Monday 9th May 13:52

[zcar]

That'll do nicely.

Thanks Graham.

Nick