Discussion
When I did mine many moons ago, I undid the starter motor using long extensions on my socket set. I then found to drop it down past the chassis rails, I needed to undo the engine mount and jack the engine slightly.
Its possible to do but usually involves a lot of swearing (watch the heat shield and the cables on re-assembly, don't want to melt the wiring after a few miles.
davidy
Its possible to do but usually involves a lot of swearing (watch the heat shield and the cables on re-assembly, don't want to melt the wiring after a few miles.
davidy
I've just checked the information in my profile, it cost me about £150 to have my starter fixed last year by Exactly-TVR.
As with most jobs like this, the first time will take ages, but subsequently you'll become an expert.
I went straight to the expert as I was then using my car everyday, so needed a quick turnaround!
As with most jobs like this, the first time will take ages, but subsequently you'll become an expert.
I went straight to the expert as I was then using my car everyday, so needed a quick turnaround!
Gassing Station | TVR Classics | Top of Page | What's New | My Stuff