Newbie a4 b5 avant 1.8t awp

[Vw nut]

I tried maplins and they gave me a random bag lol hopefully get there in the end lol

[anonymous-user]

Vw nut said:

I tried maplins and they gave me a random bag lol hopefully get there in the end lol

i think 2.2 ohms you need to clear fault code as well as you won't know it is working, make sure you disconnect battery before messing about as well...

ive got a spare vagcom clone cable you can have it is tricky to get working can't help with that but can have it free if it helps, if i can find it.

[anonymous-user]

Audizine suggests 2x5ohm resistors wired in series to stop the srs light

Eta: or a single 4.7 ohm resistor apparently!

[Vw nut]

That's good because just brought a 4.7ohm resistor lol thanks for your input bud

[anonymous-user]

Vw nut said:

That's good because just brought a 4.7ohm resistor lol thanks for your input bud

Should work out well then lol.

No worries, I know what it's like trying to get aftermarket seats to work!

[Vw nut]

Lol a joke but fill so much better than the stock ones

[anonymous-user]

Vw nut said:

Lol a joke but fill so much better than the stock ones

Exactly! Got a picture of them in?

[Vw nut]

Not yet but these are the seats mate

[Vw nut]

So today got the seats in made some custom frames will get some pics up tomorrow

[GrantD5]

Love those seats!

[Vw nut]

Cheers bud will get some pics up

[anonymous-user]

seats look spot on

[Vw nut]

Cheers bud giving it a good detail in the morning fingers cross the weather is kind to me will then get some pics up

[Vw nut]

Here are the pics really happy with them a lot better than the standard ones

[Vw nut]

Rolling rd next see where I am at power wise then take it from there hopefully get to some local meets in the area too

Edited by Vw nut on Sunday 1st October 19:33

[Vw nut]

Need to sort out my boot install next custom made a box just need to wrap it and work out where to put the amp

[Vw nut]

Fitted some hid today on the right is hid on the left is standard

[pidsy]

nice improvement. the lights on the standard avant are woeful.

which kit did you use?

[TonyRPH]

AlrightYouns said:

Audizine suggests 2x5ohm resistors wired in series to stop the srs light

Eta: or a single 4.7 ohm resistor apparently!

2 x 5 ohm in series will give 10 ohms.

2 x 5 ohm in parallel will give 2.5 ohms. (now corrected)

Seems odd then that they recommend the series connection when 4.7 ohms is the correct value.

[ETA: Fixed my calculations...

Edited by TonyRPH on Wednesday 11th October 17:44

[Vw nut]

So 4.7ohm is fine