The £7700 Corvette C6
Discussion
Fishy Dave said:
Thank you, I do feel pretty calm, it's just so much fun. The only slight nerves were when following the GT40 closely, the thought of ramming it in the back doesn't bear thinking about
Despite the final drive now being as short as will fit in the diff casing, the ratios are still fairly long. That lack of whipping up and down the 'box makes it look a little slower than it is, that and how wide the track is.
It's a C6 btw, but I'm sure you knew that and it was a slip of the keys.
I’ve got the same issues with the gearbox in my Carlton - wide spaced gears, a long throw and a stupidly long 6th but then it did get robbed from a GM parts binDespite the final drive now being as short as will fit in the diff casing, the ratios are still fairly long. That lack of whipping up and down the 'box makes it look a little slower than it is, that and how wide the track is.
It's a C6 btw, but I'm sure you knew that and it was a slip of the keys.
Fat Fingers phone keypad - sorry - I did know it was a C6
Feeling proud that Goodwood picked up my GT40 chase video. They've added some kind words too.
https://www.goodwood.com/grr/race/historic/2024/4/...
😎
https://www.goodwood.com/grr/race/historic/2024/4/...
😎
Thank you. No maintenance planned, other than another oil and filter change in a couple of months.
It's running well and with things like the rocker bearings, lifters, belts, tensioners, oil and water pumps, valve stem seals and springs, various seals and more all having been replaced in recent years, it should be ok? I know that compression will surely start to go on a cylinder at some stage and wear in bottom end bearings must have occurred with these miles and useage, but I think I'll see how long it can last.
It's running well and with things like the rocker bearings, lifters, belts, tensioners, oil and water pumps, valve stem seals and springs, various seals and more all having been replaced in recent years, it should be ok? I know that compression will surely start to go on a cylinder at some stage and wear in bottom end bearings must have occurred with these miles and useage, but I think I'll see how long it can last.
Gassing Station | Readers' Cars | Top of Page | What's New | My Stuff