Audi 4.2 V8 in a 924.
Discussion
SturdyHSV said:
Our two builds (mine far simpler!) have had some similarities, I've just finished doing a load of wiring (albeit just re-routing / extended the factory harness) and have just plumbed in my 10AN oil cooler lines
Are you going to put a thermostat in line with the cooler so it doesn't delay the oil getting up to temperature? I used the Mishimoto one, it's a nicely made piece and the thermostat can be swapped out, it comes with an 85* one.
Great project anyway, all the best with home / work and project progress
Very good, glad you have made some progress as well! Are you going to put a thermostat in line with the cooler so it doesn't delay the oil getting up to temperature? I used the Mishimoto one, it's a nicely made piece and the thermostat can be swapped out, it comes with an 85* one.
Great project anyway, all the best with home / work and project progress
I do plan on doing a inline thermostat. Looking at a couple different temp types. We get some warm temps here where we live. Over 110 degrees F. I was going to use one from Mocal since I get discounts from them.
Thank you on all three my friend! Looking forward to having a our own home soon.
My next goal of progress is getting a seconded bellhousing set up with the T/O bearing/slave cylinder.
Using a low profile Howe racing type.
Gassing Station | Readers' Cars | Top of Page | What's New | My Stuff