Quick Adivce Needed - Fuel Rail\injectors etc
Discussion
Over the last few months I've been refurbing my cerb. Last night i got everything buttoned up and went to turn it over. Once the fuel pump primed it sprayed fuel out of the joint between the fuel rail and a couple of injectors. Makes sense I've had it off, o rings looked ok but I'll replace all 16 with new. My question is, are there any other consumables that i should be replacing in this area? Trying to find out quick so i can get a clevortrevor order placed.
Cheers
Pete
Cheers
Pete
Alternator Belt was done a couple of years back. Good idea though.
I've replaced oil pressure switch ( the reason I had the fuel rail off). I was more thinking about the fuel rail\injectors specifically? Any other O rings\ seals other than the 16 on the injectors that are prone to deterioration? Didnt want to order just the 16 o rings, swap them, put rail back and then still have a leak and then have to order more bits.
I've replaced oil pressure switch ( the reason I had the fuel rail off). I was more thinking about the fuel rail\injectors specifically? Any other O rings\ seals other than the 16 on the injectors that are prone to deterioration? Didnt want to order just the 16 o rings, swap them, put rail back and then still have a leak and then have to order more bits.
Gassing Station | Cerbera | Top of Page | What's New | My Stuff