Equivalent Part Numbers

Equivalent Part Numbers

Author
Discussion

camel_landy

3,686 posts

151 months

Wednesday 5th September 2012
quotequote all
Front Upper Ball Joints

Apparently, www.elkparts.com is no longer trading.

However, it looks as though an equivalent part number from GH for these things is RC492108P.

M

Latty666

259 posts

116 months

Friday 5th October 2012
quotequote all
4.2 throttle pots are the same as rover 200/25 mg zr .. Scrap yards full of them!

tvr1432

20 posts

135 months

Thursday 11th October 2012
quotequote all
Tanguero said:
Driveshaft CV Joints and boots

For goodness sake don't pay TVR specialist prices for CV Boots. FCB2196 are £5.36 from RoadRunner and if you need the joints themselves they are only £44 from Prolinx
CV Joints - GKN301174 (marked for BMW on box) purchased from Prolinx as link above.



Juddder

673 posts

152 months

Wednesday 24th October 2012
quotequote all
I've updated my version of the

TVR Cerbera Alternative Parts

at

http://www.alexjudd.com/cerbera/parts/

and included all the latest information plus an updated drop-down control.

Let me know if there's anything else missing and I can add it in smile

Alex

DarrenRGD

734 posts

107 months

Sunday 28th October 2012
quotequote all
Just found this for alternator belts:

The number of mine is PJ432/170J EL as shown below. Oh and make sure any wires are cable tied well clear as some run very close to the belt.
TVR Power have them at £12.65 inc VAT and will mail one out to you



Regards
Simon



Edited by SimonKD on Thursday 19th November 07:32

ridds

7,415 posts

212 months

Sunday 28th October 2012
quotequote all
Kinda thought the point of this thread was to supply info of parts cheaper than that of the dealers.... wink

DarrenRGD

734 posts

107 months

Sunday 28th October 2012
quotequote all
ridds said:
Kinda thought the point of this thread was to supply info of parts cheaper than that of the dealers.... wink
Sorry, at the time it was all I could find, but further digging revealed this
[report] [news] Wednesday 14th July 2010
In case anyone is hunting for the PJ432/170J 10-rib belts for Tuscan Mk1 alternator and power steering pump, found these. Just ask for 170J/10 Contitech belt and they'll get them next day. Great service. About £7 each.

http://www.eriks.co.uk/belts/

Jhonno

4,040 posts

109 months

Monday 29th October 2012
quotequote all
Juddder said:
I've updated my version of the

TVR Cerbera Alternative Parts

at

http://www.alexjudd.com/cerbera/parts/

and included all the latest information plus an updated drop-down control.

Let me know if there's anything else missing and I can add it in smile

Alex
Rear lights are Mk3 not Mk2 Fiesta..

Juddder

673 posts

152 months

Monday 29th October 2012
quotequote all
Jhonno said:
Rear lights are Mk3 not Mk2 Fiesta..
Noted and updated

Edited by Juddder on Wednesday 31st October 12:03

Jhonno

4,040 posts

109 months

Wednesday 31st October 2012
quotequote all
Juddder said:
Jhonno said:
Rear lights are Mk3 not Mk2 Fiesta..
Noted and updated

Edited by Juddder on Wednesday 31st October 12:03
I preferred your first reply.. Upsets me too.. wink

Vee8ight

734 posts

107 months

Wednesday 26th December 2012
quotequote all
May need a part number for the interior door switches, as the ones listed from RS Components are not the ones fitted to my doors have a little green led in the middle

Supateg

684 posts

110 months

Sunday 17th March 2013
quotequote all
Another one for the Aircon Condensor

http://www.adrad.co.uk
£100 all in
Part is SANDEN MFC-2068AE
Fits fine and quality is very good.

Supateg

684 posts

110 months

Sunday 17th March 2013
quotequote all
Read a quite a few posts regarding these, so to make it easier
Data Cable for connecting to ecu (9 pin internall connector)

http://www.usbnow.co.uk/Adapters_&_Connectors-...

It has the important FTDI chipset and worked 1st time for me £12 all in.

Usb to Rs232

pmaster

4 posts

175 months

Tuesday 23rd April 2013
quotequote all
Does anyone know where to get the rear screen seal for a 97 4.2 cerb? Current one is perished and cracked.
Thanks in advance.

Jhonno

4,040 posts

109 months

Friday 26th April 2013
quotequote all
Terminal socket for control box block connectors..

http://uk.rs-online.com/web/p/pcb-connector-contac...


TVR_CS

250 posts

155 months

Sunday 5th May 2013
quotequote all
Interior mirror clip, the bit that attaches to the screen and gets broken if you catch the mirror. Saves buying a complete mirror.

http://www.ebay.co.uk/itm/PEUGEOT-205-GTI-INTERIOR...

A word of warning the replacement mirrors from the likes of Powers Performance have plastic shafts instead of metal and shake like hell when driving.

petelem

23 posts

127 months

Sunday 19th May 2013
quotequote all
AJP8 Tilton starter overhaul:

1. solenoid


http://www.ccw-tools.com/product.asp?strPageHistor...

2. starter gearbox


http://www.ccw-tools.com/product.asp?strPageHistor...

about 110 pounds both

Tanguero

4,535 posts

169 months

Friday 7th June 2013
quotequote all
nemasis said:
the rad is out of a 1985-1988 range rover(not automatic)standard radiator same as the chimaera, no tvr side plates,standard untouched radiator.

Supateg

684 posts

110 months

Saturday 15th June 2013
quotequote all
Rear Anti roll bar droplink rose joint (4.5)

M10 x 1.5 Female Right Hand Thread.

£5 for oem spec with brass bearing off ebay

or
£9.75 all in for Stainless hi spec ptfe liner and chrome plated ball version

http://stores.ebay.co.uk/McGill-Motorsports?_trksi...


Edited by Supateg on Saturday 15th June 17:10

Mad Mark

2,345 posts

200 months

Sunday 16th June 2013
quotequote all
Supateg said:
Rear Anti roll bar droplink rose joint (4.5)

M10 x 1.5 Female Right Hand Thread.

£5 for oem spec with brass bearing off ebay

or
£9.75 all in for Stainless hi spec ptfe liner and chrome plated ball version

http://stores.ebay.co.uk/McGill-Motorsports?_trksi...


Edited by Supateg on Saturday 15th June 17:10
Any ideas about the connecting rod?