RV8 Hotwire Wiring Digram

RV8 Hotwire Wiring Digram

Author
Discussion

chassis 33

Original Poster:

6,194 posts

283 months

Saturday 11th February 2006
quotequote all
Does anyone have an engine wiring loom diagram for the hotwire (14CUX)versions of the engine management they could send me?

Regards
Iain

greenv8s

30,234 posts

285 months

Saturday 11th February 2006
quotequote all
Don't have a full diagram, but I do have a loom and know roughly where everything goes. Is there anything in particular you want to know?

chassis 33

Original Poster:

6,194 posts

283 months

Saturday 11th February 2006
quotequote all
Hi Peter, basically I want to do a continuity check while the loom is out and on the bench.

Regards
Iain

greenv8s

30,234 posts

285 months

Saturday 11th February 2006
quotequote all
In that case, knowing the ECU plug pin-outs would enable you to test just about everything?

eliot

11,465 posts

255 months

Saturday 11th February 2006
quotequote all
Arr, Joe Lucas -The prince of darkness: www.mez.co.uk/lucas.html

Any use:

and


eliot

>> Edited by eliot on Saturday 11th February 16:12

>> Edited by eliot on Saturday 11th February 16:14

greenv8s

30,234 posts

285 months

Saturday 11th February 2006
quotequote all
Right click/save-as, nice one Eliot.

chassis 33

Original Poster:

6,194 posts

283 months

Saturday 11th February 2006
quotequote all
greenv8s said:
In that case, knowing the ECU plug pin-outs would enable you to test just about everything?


Peter Yes! If you have a list. Am i right i thinking they messed about with the numbering of the ECU connector at some point? Maybe thats why Eliot has posted two diagrams!!!

Thanks too to Eliot. Now need to go into the office to print that at A3 so I can read it!

Regards
Iain

greenv8s

30,234 posts

285 months

Saturday 11th February 2006
quotequote all
I haven't compared the two to see what differences there are. I do know that Steve Heath's book shows two different digrams for the ECU connector pinouts, which as far as I can see are identical except that one of them shows the connector upside down.

Mr Jenks

1,204 posts

266 months

Saturday 11th February 2006
quotequote all
The top diagram doesnt have a canister purge valve where the bottom one does, havent looked any closer for other differences yet

shpub

8,507 posts

273 months

Tuesday 14th February 2006
quotequote all
greenv8s said:
I haven't compared the two to see what differences there are. I do know that Steve Heath's book shows two different digrams for the ECU connector pinouts, which as far as I can see are identical except that one of them shows the connector upside down.


I also had two people swear blind that they were different...... Just don't trust a Wedgeowner....

There are several wiring diagrams for the ECU in the bible pages 84 and 85. The 84 one was based on another diagram and then hand traced. The bible also has the basic wiring tests as well.