Induction kit or K & N filter?????
Discussion
I am looking to replace the stock filter on my Barchetta and am considering fitting an induction kit, so far the options seem to be;
BMC CDA 85-150 at about £160.00 plus postage (good write up’s but costly) - also requires a bit of fiddling around to get it to fit but apparently is a good unit and does not suffer from heat/damp etc.....
Green Cotton Air Filter Dynatwist system about £140.pp plus postage - still requires some fiddling about but much less than the CDA system (apparently can suffer from engine compartment heat when hot/at standstill and damp in the winter when starting from cold)
K & N filter replacement at about £60.00 plus postage - direct replacement for stock filter but requires the acres of plastic ducting fitted as standard on the Barchetta's.....
Has anyone out there fitted an induction kit to a Barch? If so do you have any advice on what works best and how difficult it is to do?
BMC CDA 85-150 at about £160.00 plus postage (good write up’s but costly) - also requires a bit of fiddling around to get it to fit but apparently is a good unit and does not suffer from heat/damp etc.....
Green Cotton Air Filter Dynatwist system about £140.pp plus postage - still requires some fiddling about but much less than the CDA system (apparently can suffer from engine compartment heat when hot/at standstill and damp in the winter when starting from cold)
K & N filter replacement at about £60.00 plus postage - direct replacement for stock filter but requires the acres of plastic ducting fitted as standard on the Barchetta's.....
Has anyone out there fitted an induction kit to a Barch? If so do you have any advice on what works best and how difficult it is to do?
Gassing Station | Engines & Drivetrain | Top of Page | What's New | My Stuff