Rover V8 Ignition wiring, HELP!
Discussion
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&am...
by the way if I used this dizzy, does it have the correct drive gear for the sd1 engine??? Or will i just need to nick the bits I need and stick em on my dizzy? thanks
by the way if I used this dizzy, does it have the correct drive gear for the sd1 engine??? Or will i just need to nick the bits I need and stick em on my dizzy? thanks
I don't know for sure so an inspection is in order but it looks like it will just drop in.
Don't take the amp off unless you have to. If you do remove it then it must be refitted with heat transfer paste on the back. It gets hot and if it can't loose the heat back into the dizzy body it will go pop.
Steve
Don't take the amp off unless you have to. If you do remove it then it must be refitted with heat transfer paste on the back. It gets hot and if it can't loose the heat back into the dizzy body it will go pop.
Steve
Gassing Station | Engines & Drivetrain | Top of Page | What's New | My Stuff