Monaro cluster modding
Discussion
KMud said:
Not sure if VZclustermod would work for you (looks like you've got a VY VXR, though not sure if that rules it out), but if it would then it's cheap and simple to DIY.
Do tell although it needs to be easy as I'm Ok ish with computers but don't want to fk the car up! Yes it's a VY VXR. VinceM said:
Do tell although it needs to be easy as I'm Ok ish with computers but don't want to fk the car up! Yes it's a VY VXR.
I forget the details, Sturdy knows well though. Basically there's a thread on ls1gto that details the software development, then you need to make a cable and tweak the tables you want to change the cluster behaviour. KMud said:
Codswallop said:
Cluster mod certainly works in my VY CV8
I tried the ECT mod on my vy but I'm not convinced it took. I should really go back and check the tables.Codswallop said:
Wellfans kindly did mine when I was in Scotland. I get the Holden start up logo and the "Syetem Check... OK!" message as well as the shift light, buzzer and gearchange display message - so definitely worth trying again
It was the 'true' ECT gauge that interested me most, but I may go back in for a fiddle.ARAF said:
Ferret is in the Stevenage area, and Sturdy is around Milton Keynes, so both of those are a lot closer than Scotland.
If you're going to any of the V8UK events, Sturdy is usually there.
Ahoy!If you're going to any of the V8UK events, Sturdy is usually there.
Sorry, my internet is down at home and phone has eaten all its data, so I missed this!
I'm based in Aylesbury, happy to travel a bit too and yes, I'll be at all of the V8UK meets, I'm the one with the V8UKS numberplate
As far as complication goes, the cable is simple to make and the software is just a matter of running it and typing the right bits in. I won't profess to be any kind of expert, I'm just the tool using the tool
What you really all need to do is come along to this:
http://www.v8uk.co.uk/event/full-power-launch-2015...
Some details on the cable:
USB To Serial Adapter (as listings expire etc, you may have to search ebay if the link below is dead.)
It was listed as "FT232 Brush USB To TTL Serial Cable Line Electric Adapter FTDI Chipset Computer" and sold by 3997nicola
(The TTL bit is important, as that means it's 3.3V, which is what you need, and the FTDI chipset is a reliable USB to Serial converter chipset.)
http://www.ebay.co.uk/itm/201166318998
Then you just wire 2 of the wires in to one of these:
Listed as "Universal OBD2 II 16 Pin Male Connector Diagnostic Adapter" and sold by qqlx_uk
http://www.ebay.co.uk/itm/221461368260
They're both UK sellers, you can find them cheaper from China of course, but who wants to wait that long?!
Here's a very thorough post on how to make the cable. It involves soldering 2 wires to 2 pins. It's very simple.
http://www.ls1gto.com/forums/showthread.php?t=5798...
Here's the website by the bloke who did the software, all very simple to do, promise!
http://1337vending.com/vzclustermod/
Edited by SturdyHSV on Monday 2nd March 09:54
Sohlman said:
I am also keen to have the logo changed and shift light added to my 2004 big boot vxr. I am based in Surrey.
There was a posting about a month ago after ace meet and I sent a PM to the_ferret82 but had no response.
I am happy to travel a bit. Not as far as Scotland mind you
sorry, i never got your email, its most likey stuck in a junk mail folder somewhere.There was a posting about a month ago after ace meet and I sent a PM to the_ferret82 but had no response.
I am happy to travel a bit. Not as far as Scotland mind you
does anyone do a laymans version of that software instructions.. I don't make sense of that
or give me a basic description... if not ill happily pay someone to do it for me.
edit . just watched a video on you tube .. doesn't look that hard after all . http://www.youtube.com/watch?v=ztQfMLwfMto
or give me a basic description... if not ill happily pay someone to do it for me.
edit . just watched a video on you tube .. doesn't look that hard after all . http://www.youtube.com/watch?v=ztQfMLwfMto
Edited by maccavvy on Monday 2nd March 17:57
VinceM said:
So next question...can it be programmed to do a needle sweep when the ignition is switched on?
I very much doubt it, we're only really tinkering with existing functionality here, adding new stuff is unlikely to be possible without changing the actual boot code on the cluster, and knowing how to program it etc. = complicatedGassing Station | HSV & Monaro | Top of Page | What's New | My Stuff