Propshaft rubber guibo needed

[bonesxu1]

Where can I get a new standard rubber guibo that goes on the end of my propshaft?
Vauxhall don't have any listing in there stock.
VY Ute but Monaro one will be the same

[wozzza]

If I remember right one of the 3 series BMW’s use the same part.

[motomk]

I am cutting and pasting from another post.

motomk said:

http://www.hardyspicer.com.au/PDF_Files/Driveline/...

Page 97 in this pdf has the specs.

Hardy Spicer RCA-1061
GM 92148358
GM 92143598
These are about AUD $250

There are clone ones for about $100

Some aftermarket numbers
Kelpro KDC1003
Mackay Rubber DC4273

VTII has a different number.

Edited by motomk on Tuesday 11th September 08:58

[vxr2010]

Rock auto appear to be showing them at 136£ inclusive via the fed ex route 2 to 4 day delivery time

[fred bloggs]

you can get an ally/poly one from a company called revshift. Id advise uprated engine and trans mount though, as it wont be as flexible as a rubber one.


Jag ones fit as well. Im glad there's only one on a vt2.

[bonesxu1]

Thanks for your help guys..

[Global-i]

The GKN 249537 from a jag is identical to a 2004 CV8 guibo, the 2005 and later ones I believe are bigger PCD wise.
Jag part number = CBC8996
you can get them from ebay used for £20