Spare Key Cost
Discussion
tranter5 said:
sounds a bargain... where from?
The key shank is Ford and the fob is Meta. Karl Baker at Car and Bike can re-program (and supply fob) for you but IIRC he will need the alarm box and your other key as you can't add a key only re-program new 'sets' of keys. Give him a call and ask him he is a sound bloke who knows his Meta/TVR stuff inside out.I think Raceproved are Meta agents too as an alternative.
Shep
Or, you could code the key to the alarm yourself: taken from the Meta programming guide:
1 Arm and disarm the alarm sixteen times or until the alarm stops responding, alarm now in program mode.....
2 Once in program mode press the button of the new remotes(s), press the button of the original remote(s). This must be done within 8 seconds of each action. If 8 seconds pass without any actions the alarm will automatically exit programming mode and you will have to start from step 1.
3 Wait 8 seconds to exit learning mode.
4 Test remotes.
Job done!
1 Arm and disarm the alarm sixteen times or until the alarm stops responding, alarm now in program mode.....
2 Once in program mode press the button of the new remotes(s), press the button of the original remote(s). This must be done within 8 seconds of each action. If 8 seconds pass without any actions the alarm will automatically exit programming mode and you will have to start from step 1.
3 Wait 8 seconds to exit learning mode.
4 Test remotes.
Job done!
T350 Al said:
Or, you could code the key to the alarm yourself: taken from the Meta programming guide:
1 Arm and disarm the alarm sixteen times or until the alarm stops responding, alarm now in program mode.....
2 Once in program mode press the button of the new remotes(s), press the button of the original remote(s). This must be done within 8 seconds of each action. If 8 seconds pass without any actions the alarm will automatically exit programming mode and you will have to start from step 1.
3 Wait 8 seconds to exit learning mode.
4 Test remotes.
Job done!
Wish i had known that could of saved £50 for Jasons pleasure but he did programme with his software 5 mins it took.1 Arm and disarm the alarm sixteen times or until the alarm stops responding, alarm now in program mode.....
2 Once in program mode press the button of the new remotes(s), press the button of the original remote(s). This must be done within 8 seconds of each action. If 8 seconds pass without any actions the alarm will automatically exit programming mode and you will have to start from step 1.
3 Wait 8 seconds to exit learning mode.
4 Test remotes.
Job done!
Gassing Station | Tamora, T350 & Sagaris | Top of Page | What's New | My Stuff