Aluminium washer bottle
Discussion
Diablos-666 said:
Can you do it with the hood on?
On a t350 - yes if you are careful. With the bonnet up (obviously) you can slide the old plastic bottle back under the passenger side of the bonnet and out. New shiny replacement goes back the same way easier as it is smaller. Tips: take your time as space is limited working through the front gap and its easy to loose washers/screws etc. Probably don't want those ending up in radiator fans. Also remove rings/watches so nothing to damage paintwork.
An extra pair of (small) hands may be helpful when you come to fit the new bottle.
Don1 said:
Hello - a bump on the Sag washer bottles at all? My one now looks really crap....
pauldavies85 said:
Me too!
Morning gents.Appologies for being a little quite recently, I have had to put these (along with other items) on the back burner as I have been really busy with work (which pays the bills) and with family (which make the bills!) so my 'spare' time has been very limited.
I will be able to give these some time over the next month or so and will keep you updated on my progress.
Thanks for your patience. Cheers. Lee.
Hi All. Thought I would let you have an update.
First good news is I am making the T350 / Tamora bottles again now so will drop you an email if you have shown an interest in these. Appologies in advance but I have had to increase the cost by £2 as everything has gone up. If your interested and don't hear from me please send me a message.
Second good news is the Sag bottle is now ready. I did a trial fit on Paul's Sag (thanks again) today and all went really well and got some good feedback. I already have a big list for these and again will send you all a mail. Please drop me a message if you haven't done so already if your interested in these.
Like the T350 / Tam bottle the Sag ones are polished aluminium with the pump recess formed in the rear to keep it out of view. They also come with an aluminium screw cap. I hope you like it, here is a before and a couple of after pics:
As usual if you have any questions etc please let me know.
Thanks for your patience and interest.
Lee.
First good news is I am making the T350 / Tamora bottles again now so will drop you an email if you have shown an interest in these. Appologies in advance but I have had to increase the cost by £2 as everything has gone up. If your interested and don't hear from me please send me a message.
Second good news is the Sag bottle is now ready. I did a trial fit on Paul's Sag (thanks again) today and all went really well and got some good feedback. I already have a big list for these and again will send you all a mail. Please drop me a message if you haven't done so already if your interested in these.
Like the T350 / Tam bottle the Sag ones are polished aluminium with the pump recess formed in the rear to keep it out of view. They also come with an aluminium screw cap. I hope you like it, here is a before and a couple of after pics:
As usual if you have any questions etc please let me know.
Thanks for your patience and interest.
Lee.
Gassing Station | Tamora, T350 & Sagaris | Top of Page | What's New | My Stuff