Ceramic Brakes for Aston V8
Discussion
yeti said:
Zod said:
On my second M3, I got the front discs' holes utterly clogged after a couple of track days. I had to use wooden skewers to clean them.
Sounds like they need to be cleaned after a each trackday then..?I might check mine tonight, can is being disconnected and covered while I head to the moutains for a while. Good time to have a look at it.
mikey k said:
Did you see the Brembo logo on the shims or the pads (or both)?
When I stripped down the brakes on 4.7 the calipers & shims are badged Brembo but IIRC there were no markings on the pads.
The Brembo logo was on the backing plate of my OEM pads. The anti-squeal shims had no logo. I replaced the pads with with Porterfield (which have substantially less dust) 2-weeks after I bought my car, so the OEM ones were still virtually new. The car is a 07MY. When I stripped down the brakes on 4.7 the calipers & shims are badged Brembo but IIRC there were no markings on the pads.
I think I read somewhere that the OEM pads are Pagid RS4-2-2 but with a Brembo Logo, though I could be repeating a rumour of a rumour
I also confirmed today that the rear brakes on the "S"(discs and pads) are the same as on the latest normal Vantages, it's just the fronts that are different.
I also confirmed today that the rear brakes on the "S"(discs and pads) are the same as on the latest normal Vantages, it's just the fronts that are different.
Gassing Station | Aston Martin | Top of Page | What's New | My Stuff