Rubber Jacking Pads Available
Discussion
LLaPGoCh said:
Another happy customer of these pads for my Vantage, had to do a switch out of the version one edition for the version two but this was all dealt with without any hassle.
Would highly recommend Steve and Mary if anyone is looking out for a set.. especially for the price ;-)
which ones are they and what Aston are they for?Would highly recommend Steve and Mary if anyone is looking out for a set.. especially for the price ;-)
Very happy with mine too
However the more I read on t’internet the more I worry
Thoughts of damaging the chassis etc. It must be ok to jack just one point to say change a front tyre for instance. Or should a full side be lifted to avoid twist? I’ve got the tools to do that but wasn’t sure if really necessary?
However the more I read on t’internet the more I worry
Thoughts of damaging the chassis etc. It must be ok to jack just one point to say change a front tyre for instance. Or should a full side be lifted to avoid twist? I’ve got the tools to do that but wasn’t sure if really necessary?
morty1961 said:
which ones are they and what Aston are they for?
Mine are the AM4Version2 for a 2009 4.7 V8 Roadster, I originally purchased the AM4 Version1 but after reading on here that the Version2 would be more suitable for my car I contacted Steve who switched them without any issues.. hope that helpsLLaPGoCh said:
morty1961 said:
which ones are they and what Aston are they for?
Mine are the AM4Version2 for a 2009 4.7 V8 Roadster, I originally purchased the AM4 Version1 but after reading on here that the Version2 would be more suitable for my car I contacted Steve who switched them without any issues.. hope that helpsLLaPGoCh said:
Another happy customer of these pads for my Vantage, had to do a switch out of the version one edition for the version two but this was all dealt with without any hassle.
Would highly recommend Steve and Mary if anyone is looking out for a set.. especially for the price ;-)
Can confirm that these AM4 V2 pads fit the 09-13 V12V Manual coupes … excellent service from Steve and Mary quality product.Would highly recommend Steve and Mary if anyone is looking out for a set.. especially for the price ;-)
Lee
Just took delivery of the AM4v2 for my 2007 V8 Roadster. Guess what, they fit perfectly and my car was up!
Excellent response, advice and service from Steve, I've had to mark them with Tipex to remember which design is front/rear and which colour left/right. That's my problem not Steve's...
I put them in the small cubby behind the seat in case some rough type with a jack has to be called into action while I'm out.
Recommended
Excellent response, advice and service from Steve, I've had to mark them with Tipex to remember which design is front/rear and which colour left/right. That's my problem not Steve's...
I put them in the small cubby behind the seat in case some rough type with a jack has to be called into action while I'm out.
Recommended
Froomee said:
Iv just purchased a facelift 2015 Vantage v8 coupe (I’ll post some pictures once I take delivery this week).
I believe I require the AM4v2 pads? Can someone confirm this or advise which ones I require.
Thanks in advance for any advice.
Did you get your car and can you post some pictures of the jacking points?I believe I require the AM4v2 pads? Can someone confirm this or advise which ones I require.
Thanks in advance for any advice.
Gassing Station | Aston Martin | Top of Page | What's New | My Stuff