DB9 Rear Subframe Refurbishment Project.
Discussion
The cost of the subframe and antiroll bar painting and vapour blasting the suspension components were around £500 in 2020, so not sure now.
Plus add on any new parts you need, I just went all in and replaced anything that looked worn or corroded.
Step by step it's a good job, take your time.
Good luck.
Plus add on any new parts you need, I just went all in and replaced anything that looked worn or corroded.
Step by step it's a good job, take your time.
Good luck.
thankyou.
I'm looking at buying a 2005 but the rear subframe is rather rusty .rear anti roll bar brackets and drop links ect all badly rusted.Was just trying to get a ballpark figure to justify my offer.
If you were to charge a labour cost and add new parts and paint ect you be around £££?
I'm looking at buying a 2005 but the rear subframe is rather rusty .rear anti roll bar brackets and drop links ect all badly rusted.Was just trying to get a ballpark figure to justify my offer.
If you were to charge a labour cost and add new parts and paint ect you be around £££?
I done mine myself over the winter. As an estimate I think I spent about £2000 on the subframe related works. I had the sub frame primed and powder coated, coated internal voids with dynax s60, vapour blasted all suspension arms etc, replaced a number of nuts, bolts, handbrake cable, brake lines, DAE ASM hoses and had all the nuts and bolts cadmium plated, changed transaxle fluid and ASM Fluid, 4 wheel alignment etc etc. I’ve since ended up spending more on replacing the exhaust valves that were sized, brakes, service items. I was happy to carry out the works as the majority of cars I viewed needed the above works carried out.
Hope that helps
Hope that helps
Gassing Station | Aston Martin | Top of Page | What's New | My Stuff