DBS wheels on a DB9

DBS wheels on a DB9

Author
Discussion

Ocean53

Original Poster:

374 posts

185 months

Tuesday 11th August 2009
quotequote all
Does anyone know if the 10 spoke 20" with graphite will go on a db9 without any probs?

bmcoopers

17 posts

177 months

Friday 14th August 2009
quotequote all
just check tyre sizes as thats were problems lie. But the alignment is the same

Edited by bmcoopers on Friday 14th August 13:26

rick-derby-

1,105 posts

188 months

Friday 14th August 2009
quotequote all
they are not the same, 19 inch as standard on the V8 Vantage and DB9, where as the DBS wheels are 20 inch and wider,centre stud pattern is the same,

Aston do not recommend fitting them due to clearance issues under extreme circumstances such as track days where the suspension could be fully depressed and the steering on lock with brakes applied forcing the body down could cause contact between tyre and body, obviously this could be potentially very dangerous, on saying this many people have had them with no contact problems with some fitted by the dealer network, so for normal driving even aggressively there should not be any issues,

price difference in the tyres for a full set will be about £300.00 more, that is for pirelli p zeros

bmcoopers

17 posts

177 months

Friday 14th August 2009
quotequote all
there wont be an issue because as they are bigger wheels you just need to get different profile tyres to counteract it! with them being wider, it isnt much issue on these,check what J they are i.e how wide! tyre sizes can be altered as i said to help in all different ways.. to a limit!

Edited by bmcoopers on Friday 14th August 13:28

rick-derby-

1,105 posts

188 months

Friday 14th August 2009
quotequote all
please if you are going to give technical advice please submit all the facts as it is not just the j size as stated it is the offset as well that really matters, the only thing that is the same as the originals is the pcd (stud pattern)

here is a link to the dimensions etc for Aston Martin wheels

http://www.derbymotorservices.com/faq/questions/10...

bmcoopers

17 posts

177 months

Monday 17th August 2009
quotequote all
ok, but i ask if there is any need to go into so much detail,thats why i didnt,he asked if theyd fit, i basically answered that without trying to confuse somebody but i know in future to be more technical as not to upset other people.
p.s there was no need to mention the pcd thats why i didnt!

Edited by bmcoopers on Monday 17th August 11:04