929RRY Fireblade - Scottoiler

[dern]

Unlikely I realise but has anyone got a 929RRY blade with a scottoiler fitted where they could take a picture of where the feed to the chain is could they? I've had it on th ebike for a while but following the instructions routing the tube under the swingarm means that the scottoiler works but that I can't use my paddock stand whereas routing it down the side means that I can use the paddock stand but that the tube occasionally gets caught between sprocket and chain and gets dumped by the roadside. Very frustrating situation which I want to resolve as I'm fitting a new chain this w/e.

Ta,

Mark

[road_rager]

I've got mine routed to the front sprocket, works much better HTH

[dern]

road_rager said:

I've got mine routed to the front sprocket, works much better HTH

That's a good idea. Thanks

[podman]

..or route the piping over the TOP of the swingarm, then by the chain adjuster blocks bring the feed pipe down to the bottom run of the chain...works well that way as well.

[dern]

podman said:

..or route the piping over the TOP of the swingarm, then by the chain adjuster blocks bring the feed pipe down to the bottom run of the chain...works well that way as well.

I tried that but the bolts holding the rear sprocket hits the feed tube.

[podman]

Mmmm...thats how ive done all my bikes, got any pics of the current installation?

[dern]

podman said:

Mmmm...thats how ive done all my bikes, got any pics of the current installation?

I'm afraid not. I'll have a dick about with it this w/e if the new chain turns up in time. Thanks anyway.