Zertec Afterburner Rear Light Sets
Discussion
quote:
1. Just work your way through the various light switches until one of the wires goes live, then connect it to the appropriate lead from the new light cluster.
2. Don't assume that, just because e.g. the green and purple wire on the left-hand side activates the brake lights, it's the same on the other: it's not!
3. Repeat until finished.
Surely though the instructions have to say 'connect blue wire to red wire' don't they? Or am I under a missaprehension?
Hi guy and girls, Just thought you may like to no that I purchased some 'clear Tinted' mk3 fiesta rear lights from a boy racer shop (tuv approved) for 130 quid, because my TIV is starmist blue these rear lights give it a mysterious look if you no wot I mean, they do look good. Ive put a picture on my profile, take a look and tell me wotyou think.
quote:
Hi guy and girls, Just thought you may like to no that I purchased some 'clear Tinted' mk3 fiesta rear lights from a boy racer shop (tuv approved) for 130 quid, because my TIV is starmist blue these rear lights give it a mysterious look if you no wot I mean, they do look good. Ive put a picture on my profile, take a look and tell me wotyou think.
They look the part! Mine's Starmist Blue too - well worth investigating, presumably easy to replace.
And is that a boot spoiler???
As Mikey said I would like to see these units in the flesh or even fitted to a Chimaera. I live in Guildford so if anyone nearby is willing to show me they're Zertec's it would be appreciated. Before you ask I've used this as a chat-up line and it dosen't work.
The fitting info is well useful. I didn't realise the wiring loom was so variable, but then why should that be different from the rest of the car.
Brian
The fitting info is well useful. I didn't realise the wiring loom was so variable, but then why should that be different from the rest of the car.
Brian
quote:
As Mikey said I would like to see these units in the flesh or even fitted to a Chimaera. I live in Guildford so if anyone nearby is willing to show me they're Zertec's it would be appreciated. Before you ask I've used this as a chat-up line and it dosen't work.
The fitting info is well useful. I didn't realise the wiring loom was so variable, but then why should that be different from the rest of the car.
Brian
Brian, I live in Guildford and am having Afterburners fitted to my Black Chim next week by David Batty at the Garage Compton
Would be happy to show you. Also having some nice new badges fitted.
I decided to get someone else to do it, as I'm technically challenged !
Some pics of afterburner lights (painted the black pods myself) fitted to the Cerb.
www.fotango.com/p/eba00199066f00000006.jpg
www.fotango.com/p/eba00199066f00000008.jpg
Dan
www.fotango.com/p/eba00199066f00000006.jpg
www.fotango.com/p/eba00199066f00000008.jpg
Dan
Hi Mike, will let you know when I'm ready to sell! I think the colour is one of the best I've seen on a TVR (Antique Turquoise), although I like some of the Chameleon colours. Tuscan R in chameleon orange with 20" anthracite alloys next?
Afterburners - took one look at the instructions and decided to take it to the dealer to fit. I was too much of a coward to attempt it myself, although I dare say anyone with a decent grasp of car mechanics (i.e not me!) would find it easy. Hexham HC charged me £110 to fit and said it normally takes them 6 hours to do. Was worth it though as the end result looks spot on (IMO) especially with the pods painted in the car's colour
All the best, Dan
Afterburners - took one look at the instructions and decided to take it to the dealer to fit. I was too much of a coward to attempt it myself, although I dare say anyone with a decent grasp of car mechanics (i.e not me!) would find it easy. Hexham HC charged me £110 to fit and said it normally takes them 6 hours to do. Was worth it though as the end result looks spot on (IMO) especially with the pods painted in the car's colour
All the best, Dan
Gassing Station | Chimaera | Top of Page | What's New | My Stuff