FITTING A NEW IGNITION MODULE AND COIL ANY TIPS
Discussion
yes it should be a lucas module that I've ordered where does the heat sink paste go/do ?
and ordered a bosch coil all from ml performance parts "neil"
hi lester your more than welcome to call round when i'm doing the job i'll try to let you know nearer the time
I guess your doing the same as me replacing parts that could break down in a 13 yr + car and keeping the old parts as spares
cheers keith
and ordered a bosch coil all from ml performance parts "neil"
hi lester your more than welcome to call round when i'm doing the job i'll try to let you know nearer the time
I guess your doing the same as me replacing parts that could break down in a 13 yr + car and keeping the old parts as spares
cheers keith
PYNEY said:
yes it should be a lucas module that I've ordered where does the heat sink paste go/do ?
and ordered a bosch coil all from ml performance parts "neil"
hi lester your more than welcome to call round when i'm doing the job i'll try to let you know nearer the time
I guess your doing the same as me replacing parts that could break down in a 13 yr + car and keeping the old parts as spares
cheers keith
Ok Keith I'll make sure the parts are to hand for when I get the nodand ordered a bosch coil all from ml performance parts "neil"
hi lester your more than welcome to call round when i'm doing the job i'll try to let you know nearer the time
I guess your doing the same as me replacing parts that could break down in a 13 yr + car and keeping the old parts as spares
cheers keith
Lester
I replaced my ignition module a couple of weeks ago, really straight forward job. There are only 2 or 3 wires to remove from the old one and reattach to the new one and its obvious which one goes where. Just dont drop the bolts! And as already mentioned make sure you apply the thermal paste evenly and liberally to the back plate of the module.
hi all
I fitted my new coil and ignition module today , it was a straight forward job but fiddly
here are some photo's to help others in doing this maintenance task
new ign module with paste and coil
existing coil and ign module
[url]|http://thumbsnap.com/Fcbw223w[/url
old ign module removed with the cleaned bracket ready to take the new ign module
new ign module with thermal paste applied
new ign module and coil fitted
I fitted my new coil and ignition module today , it was a straight forward job but fiddly
here are some photo's to help others in doing this maintenance task
new ign module with paste and coil
existing coil and ign module
[url]|http://thumbsnap.com/Fcbw223w[/url
old ign module removed with the cleaned bracket ready to take the new ign module
new ign module with thermal paste applied
new ign module and coil fitted
Gassing Station | Chimaera | Top of Page | What's New | My Stuff