Wing grommets

[Discopotatoes]

Any one know where I can get some new grommets?
I'm after the ones in the divers inner wing for the servo vac pipe and throttle cable
Cheers
Disco

[MADMAX2]

Discopotatoes said:

Any one know where I can get some new grommets?
I'm after the ones in the divers inner wing for the servo vac pipe and throttle cable
Cheers
Disco

snap! so am i!

was in the garage polishing alloy bites etc... and debating still on fitting the gucci bonnet pins when i thought next thing i need to replace is the rubber grommets!!!!!!!!

i dunno about divers ones disco!

[GasMunkey]

I got some blanks some where kicking about, or are you after the stock ones?

[MADMAX2]

GasMunkey said:

I got some blanks some where kicking about, or are you after the stock ones?

enlighten me... whats the blanks you have that are different to stock?

[GasMunkey]

MADMAX2 said:

enlighten me... whats the blanks you have that are different to stock?

Mine blank things, and the stock ones have holes in

[GasMunkey]

[Sardonicus]

I am sure someone mentioned they are sourced from a Land Rover.

[MADMAX2]

GasMunkey said:

always good to have a pic!

[tvr marvin]

Hi,
If they are the same as in the Griff (which I think) they are a Land rover part:

GROMMET 7 X 53MM P/N 589452

Search the web for a webshop with pictures, so you can check.
Rgds,

Marvin

[Discopotatoes]

Cheers fellas, I filled one for the purge valve pipe I might do the same to the others and the just have one whith the brake servo pipe and throttle cable together

[phazed]

Sardonicus said:

I am sure someone mentioned they are sourced from a Land Rover.

Everything's from a Land Rover, I'm surprised they haven't got 4 wheel drive

[Discopotatoes]

Just got these of fleabay
Item number: 261101337984

[2gins]

Holy thread resurrection, Batman

John Craddock has the grommets noted above for £1.71 but they are the smaller ones from the look of it that take the throttle cable, not the bigger dia. ones for the hoses.

Is it a case of trimming the centre out to the right size or is there another part?

[jojackson4]

CEF
32mm blind grommets for the black ones

[phazed]

About a zillion here.....

https://www.ebay.co.uk/sch/i.html?_from=R40&_t...

[2gins]

phazed said:

About a zillion here.....

https://www.ebay.co.uk/sch/i.html?_from=R40&_t...

Yes Peter but just try finding the right one... ebay is the best and worst place for stuff like that, usually millions of items but they all look the same using library photos with ambiguous descriptions, then you find one but it comes from China with a 4 week lead time ...

jojackson4 said:

CEF
32mm blind grommets for the black ones

Thanks but I don't want blind grommets; search for 32 mm grommet and they don't have anything that looks like the original, the holes too big and not sure it'll fit the thickness of the GRP either.

Think I haven't been looking?!

Edited by 2gins on Thursday 7th March 16:22

[Sardonicus]

LR part number 589452 these are what I used they have correct thick lip for GRP body and the hoses pass through no problem inc the bigger servo hose with no mods , I sourced genuine old stock LR Defender

[phillpot]

£8 a pair seem reasonable? .............. Grommets

[NZ fan]

TVR parts have them https://tvr-parts.com/tvr-parts/part-details/tvr-n...

[Sardonicus]

phillpot said:

£8 a pair seem reasonable? .............. Grommets

Well I didnt pay that obviously but its all out there if you look seconds later ...... http://www.lrseries.com/shop/product/listing/1647/...