Discussion
Ride height is quite important as a first job because the suspension has unequal length wishbones. Rear 155mm, front 145mm outrigger corner to ground should give you horizontal lower wishbones
Rear
1.4 degrees neg camber
1.5mm toe in per side (12 minutes)
Front
3/4 of degree of neg camber
0.75mm toe in per side (6minutes)
Rear
1.4 degrees neg camber
1.5mm toe in per side (12 minutes)
Front
3/4 of degree of neg camber
0.75mm toe in per side (6minutes)
Edited by bobfather on Thursday 8th October 07:51
Gassing Station | Chimaera | Top of Page | What's New | My Stuff