Chim lower steering column bush/bearing
Discussion
Does anyone know what can be done with a clunky lower bush on the column?
The 'unit' that's bolted to the bulkhead/pedal-box on in the wheelarch where the column comes through. The inner column is rattling around inside that, upper column is fine, and outer column is all tight.
Is there a bush or bearing inside that 'unit' which can be replaced?
Would it by any chance be this?
Thanks
The 'unit' that's bolted to the bulkhead/pedal-box on in the wheelarch where the column comes through. The inner column is rattling around inside that, upper column is fine, and outer column is all tight.
Is there a bush or bearing inside that 'unit' which can be replaced?
Would it by any chance be this?
Thanks
It may be the plastic insert, wouldn't have thought that the ball bearing would rattle.
http://www.powersperformance.co.uk/store/slug/stee...
http://www.powersperformance.co.uk/store/slug/colu...
http://www.powersperformance.co.uk/store/slug/stee...
http://www.powersperformance.co.uk/store/slug/colu...
Gassing Station | Chimaera | Top of Page | What's New | My Stuff