side windows - automatic drop and raise when opening door
Discussion
Just had a new roof fitted, and have a new problem that I did not have before. When closing the door with the windows in the fully up position the glass sits on top of the fabric rain gutter/flap rather rather than under the flap.
Obviously I can push the buttons to drop and raise the side windows, but wondered how easy it was to modify the electric windows to add a feature that drops the side windows slightly when the door is opened, and raises the side window when the door is closed. This is a standard feature on Tuscans and a good number of other modern soft top cars.
Any suggestions and instructions gratefully received.
Obviously I can push the buttons to drop and raise the side windows, but wondered how easy it was to modify the electric windows to add a feature that drops the side windows slightly when the door is opened, and raises the side window when the door is closed. This is a standard feature on Tuscans and a good number of other modern soft top cars.
Any suggestions and instructions gratefully received.
http://www.pistonheads.com/gassing/topic.asp?h=0&a...
Also see here for a detailed run down on how to do the windows
Also see here for a detailed run down on how to do the windows
Edited by ray von on Monday 11th July 11:23
Verpoorten Technik Automotive do a kit for this. Here it is on their Chimaera
https://www.youtube.com/watch?v=gGGNKkN00cw
https://www.youtube.com/watch?v=gGGNKkN00cw
ray von said:
Who did your roof?
Classic Car Services in Leicester fitted the roof, and did a pretty good job in my opinion. They fitted a hood with the smaller square shaped window, supplied by Mazda Hoods in Romford. All in it was £786.I will post some pictures when the weather picks up and I can get the car out and photographed.
So far I am happy with the smaller window. It folds down much easier than the previous and original hood. Steve (the fitter) did comment that the roof from Mazda Hoods was easy to fit as the fabric had a bit of stretch/give in it.
The windows overlap on the rain gutter/flap is perhaps only 1 or 2mm, and may sort itself out over time anyway as the flap finds its own position on top of the glass, if I can get the flap to stick out a but more rather than following the line of the roof panel down towards the glass.
Edited by Smokey Boyer on Monday 11th July 12:31
Smokey Boyer said:
ray von said:
Who did your roof?
Classic Car Services in Leicester fitted the roof, and did a pretty good job in my opinion. They fitted a hood with the smaller square shaped window, supplied by Mazda Hoods in Romford. All in it was £786.I will post some pictures when the weather picks up and I can get the car out and photographed.
So far I am happy with the smaller window. It folds down much easier than the previous and original hood. Steve (the fitter) did comment that the roof from Mazda Hoods was easy to fit as the fabric had a bit of stretch/give in it.
The windows overlap on the rain gutter/flap is perhaps only 1 or 2mm, and may sort itself out over time anyway as the flap finds its own position on top of the glass, if I can get the flap to stick out a but more rather than following the line of the roof panel down towards the glass.
Edited by Smokey Boyer on Monday 11th July 12:31
Top tip, l also put slight cure in my targa seal rail to match the curve in the window,OCD maybe but ensured the window fitted flush and was located perfectly in the centre as it touched all the way along the targa rubber window seal.
Edited by portzi on Monday 11th July 15:14
Milky400 said:
Not criticising there work, but you say they have done a good job but have now left you with another issue!!!
I'd expect for that money that they returned the car to me with a new roof and all working fine and not experiencing issues you describe.
The install of the roof is fine, and the windows fit in to the rubber seals far better tham they did before and I do not have a problem with their work at all.I'd expect for that money that they returned the car to me with a new roof and all working fine and not experiencing issues you describe.
My only issue is that the door glass very slightly catches the fabric flap if the door is closed with the window up. If I open the window slightly and close it once the door is closed everything fits together very well and the fabric flap sites outside of the glass as expected. I am reluctant to change too much on the glass or seal position as it is way better than it has ever been.
I am just trying to find a solution to a problem that TVR created in the first place by not automatically dropping the windows slightly when the doors open, and then raising them when closed. They added this feature on to the later T generation cars, and wanted to know how feasible it was to retro fit that to an early Chimaera. It might just take a bit of time for the flap to form to the required bend so that it sticks out a bit rather than following the line of the glass.
On the positive side of things, at least I still have the rain flap in place. I have heard of some fitters not bothering with it and just forming the fabric to the roof panel flush all the way around.
Edited by Smokey Boyer on Monday 11th July 15:50
Edited by Smokey Boyer on Monday 11th July 16:52
Smokey Boyer said:
Milky400 said:
Not criticising there work, but you say they have done a good job but have now left you with another issue!!!
I'd expect for that money that they returned the car to me with a new roof and all working fine and not experiencing issues you describe.
The install of the roof is fine, and the windows fit in to the rubber seals far better that they did before and I do not have a problem with their work at all.I'd expect for that money that they returned the car to me with a new roof and all working fine and not experiencing issues you describe.
My only issue is that the door glass very slightly catches the fabric flap if the door is closed with the window up. If I open the window slightly and close it once the door is closed everything fits together very well and the fabric flap sites outside of the glass as expected. I am reluctant to change too much on the glass or seal position as it is way better than it has ever been.
I am just trying to find a solution to a problem that TVR created in the first place by not automatically dropping the windows slightly when the doors open, and then raising them when closed. They added this feature on to the later T generation cars, and wanted to know how feasible it was to retro fit that to an early Chimaera. It might just take a bit of time for the flap to form to the required bend so that it sticks out a bit rather than following the line of the glass.
On the positive side of things, at least I still have the rain flap in place. I have heard of some fitters not bothering with it and just forming the fabric to the roof panel flush all the way around.
Edited by Smokey Boyer on Monday 11th July 15:50
bobfather said:
Verpoorten Technik Automotive do a kit for this. Here it is on their Chimaera
https://www.youtube.com/watch?v=gGGNKkN00cw
Can't find the kit on their website though ... it's something I'd find very useful too.https://www.youtube.com/watch?v=gGGNKkN00cw
ETA - I just noticed that the youtube video was uploaded today (11/7/16), so maybe it's just not on their website yet. I've sent them an email about it anyway.
sgrimshaw said:
bobfather said:
Verpoorten Technik Automotive do a kit for this. Here it is on their Chimaera
https://www.youtube.com/watch?v=gGGNKkN00cw
Can't find the kit on their website though ... it's something I'd find very useful too.https://www.youtube.com/watch?v=gGGNKkN00cw
ETA - I just noticed that the youtube video was uploaded today (11/7/16), so maybe it's just not on their website yet. I've sent them an email about it anyway.
ray von said:
Ah, not under Chimaera ... Thanks for that.Not a bad price, will be following that up.
Couple of videos on the VT website now ... also appears to close the windows when you lock the car.
http://vtautomotive.com/shop/?product_tag=electric...
The videos are below the item details.
http://vtautomotive.com/shop/?product_tag=electric...
The videos are below the item details.
sgrimshaw said:
Couple of videos on the VT website now ... also appears to close the windows when you lock the car.
http://vtautomotive.com/shop/?product_tag=electric...
The videos are below the item details.
Not sure it does. I'm certain I've seen something that says it's not linked to the alarm. I emailed for more info but haven't heard anything back yet http://vtautomotive.com/shop/?product_tag=electric...
The videos are below the item details.
ray von said:
Not sure it does. I'm certain I've seen something that says it's not linked to the alarm. I emailed for more info but haven't heard anything back yet
From the video you hear a "click" which sounds the same as when you press the button on the key fob to lock the doors and the window closes. The door is already shut.Time will tell ... I've ordered the kit.
Booked it in for fitting in August at TVRSSW ... I'll post a review later if anyone's interested.
Does the glass catch on both side of the car or just one?
The targa panel may not be quite central. Try just releasing the tension from the rear section and gently pushing the tarragon from the side that is catching.
If it is catching on both side then it sounds like the material is just a bit thicker than the old one and you need to adjust the window slightly as mentioned earlier in the thread.
The targa panel may not be quite central. Try just releasing the tension from the rear section and gently pushing the tarragon from the side that is catching.
If it is catching on both side then it sounds like the material is just a bit thicker than the old one and you need to adjust the window slightly as mentioned earlier in the thread.
Gassing Station | Chimaera | Top of Page | What's New | My Stuff