Converting to Corrado mirrors

[mk1fan]

Max and Steve spring to mind but that may have been Facialachage posts.

Paul did this - https://www.pistonheads.com/gassing/topic.asp?h=0&... - but that requires an intact mushroom to begin with.

Reviewing the thread from page one might be worth a shout
https://www.pistonheads.com/gassing/topic.asp?h=0&...

Grief forum rather than the S though, memory must need a cache clean . Enter at own risk. Funny lot those grief owners.

[phillpot]

[quote=mk1fan
Reviewing the thread from page one might be worth a shout
https://www.pistonheads.com/gassing/topic.asp?h=0&...


[/quote]

That is a clever little mod but is an addition to the 'Toadstool mount' not a replacement for it ;(


........ and yes, there are some strange Griff owners, nearly as strange as some S owners

[lee02]

Steve_D said:

This is all you need.


Give me a PM if you need it in another format. It was drawn in Visio.

Steve

Steve kindly supplied me me the drawing, I made up a loom on the bench tonight following the drawing connected it to a battery it worked straight away with no issues.

As steve stated. There is no need for a relay the rocker switch is used to change polarity.

It is so simple. If anyone is considering carrying out the conversion I have loads of pics and can CAD up the door with some dims on it for drilling the holes.

Thanks for your help, off to Whitstable Saturday

lee