Bulkhead bearing housing dimensions?

Bulkhead bearing housing dimensions?

Author
Discussion

Oldred_V8S

Original Poster:

3,419 posts

176 months

Monday 11th February
quotequote all
Does anyone have the dimensions for the bulkhead bearing housing?

I want to make an ally one but don't really want to remove the old housing to measure it until it is time to replace it.

I'm sure I saw some drawings on here a while ago but the search isn't yielding the desired results.

HvdWeerden

1,660 posts

138 months

Monday 11th February
quotequote all
don't know but this is the bearing :

https://uk.rs-online.com/web/p/ball-bearings/12348...

v8s4me

6,204 posts

157 months

Monday 11th February
quotequote all
Any help?



Also see HERE

PM me if you want to borrow one to take measurement s from thumbup

Alan Whitaker

1,953 posts

120 months

Monday 11th February
quotequote all
Are you looking at making the bearing housing, I made a heavy duty one that uses the TVR bearing and would take the triangle column bush. I am away for the rest of the week but can take a measurement at the weekend for you.

I use a ring on the other side drilled and tapped M6 X 5 cap heads




Edited by Alan Whitaker on Monday 11th February 13:55

Oldred_V8S

Original Poster:

3,419 posts

176 months

Monday 11th February
quotequote all
Alan Whitaker said:
Are you looking at making the bearing housing, I made a heavy duty one that uses the TVR bearing and would take the triangle column bush. I am away for the rest of the week but can take a measurement at the weekend for you.

I use a ring on the other side drilled and tapped M6 X 5 cap heads




Edited by Alan Whitaker on Monday 11th February 13:55
That's the one Alan, thank you.
Advertisement

Alan Whitaker

1,953 posts

120 months

Monday 11th February
quotequote all
I think there was one of the TVR car parts who did one, It came with the bearing and triangle bush, think it was 4 bolts but made in aluminium.

Steve_D

12,062 posts

196 months

Monday 11th February
quotequote all
Alan Whitaker said:
I think there was one of the TVR car parts who did one, It came with the bearing and triangle bush, think it was 4 bolts but made in aluminium.
Racetech do them.

https://www.racetechdirect.co.uk/car-parts/suspens...

phillpot

14,644 posts

121 months

Tuesday 12th February
quotequote all
Steve_D said:
Racetech do them.
I'm guessing you know about those Paul but want the satisfaction of making one yourself?

I think I have an old plastic one somewhere I could take some measurements from, or send you it to measure yourself?

Oldred_V8S

Original Poster:

3,419 posts

176 months

Wednesday 13th February
quotequote all
phillpot said:
Steve_D said:
Racetech do them.
I'm guessing you know about those Paul but want the satisfaction of making one yourself?

I think I have an old plastic one somewhere I could take some measurements from, or send you it to measure yourself?
That's correct Mike. If yours is to hand would it be possible to take some measurements if it is not a pain. I just need the largest diameter at the moment as I need to order the metal stock. Many thanks.

phillpot

14,644 posts

121 months

Thursday 14th February
quotequote all
Oldred_V8S said:
If yours is to hand would it be possible to take some measurements if it is not a pain.
A total pain, but for you Paul..................... smile

75mm dia x 17mm


This is the bearing ..... bearing



Edited by phillpot on Thursday 14th February 11:22

Oldred_V8S

Original Poster:

3,419 posts

176 months

Thursday 14th February
quotequote all
phillpot said:
A total pain, but for you Paul..................... smile

75mm dia x 17mm


This is the bearing ..... bearing



Edited by phillpot on Thursday 14th February 11:22
Mike

You are an officer and a gentleman, I don't care what anyone else says.

glenrobbo

13,335 posts

88 months

Saturday 16th February
quotequote all
Oldred_V8S said:
Mike

You are an officer and a gentleman, I don't care what anyone else says.
Some say he is Glenn Miller reincarnated. wink