Where can I get one of these?
Discussion
ric355 said:
Hi folks, it's me who produces these.
The second photo posted is with the optional phone holder. To insert the unit and get a flush fit like in the photo you must remove the triangular pad from the bottom of the area it fits in.
If you would like one, you can contact me here.
Do you do these in colours or are they paintable ?The second photo posted is with the optional phone holder. To insert the unit and get a flush fit like in the photo you must remove the triangular pad from the bottom of the area it fits in.
If you would like one, you can contact me here.
What is the cost for them, UK delivery too, please ?
Ptr400J said:
Do you do these in colours or are they paintable ?
What is the cost for them, UK delivery too, please ?
I only produce in black but they are indeed paintable with automotive paint. I used an etch primer on mine first. You can sand it back a bit if painting to get a better finish - the wall thickness is about 1mm. They are made from an ABS hybrid material.What is the cost for them, UK delivery too, please ?
I suspect I'm treading a fine line quoting costs on here and may get moderated, which is why I haven't done so thus far or indeed advertised them on the forum at all. Drop me an e-mail via my profile for details.
TVRSJW said:
Spiked my interest , does the pad just pull out without need to remove anything ? And does this then just drop in ?
Yes and yes. 99.99% of the time. I did have one person whose pad seemed to have been glued in but this is totally non-standard since there are fixing screws underneath that hold the centre console on. There is usually a tab stitched to the pointed end of the pad. Just grab it and pull !!Gassing Station | Chimaera | Top of Page | What's New | My Stuff