Short SERP belt
Discussion
On non pas cars, there is an idler pulley wheel so the belts are the same. Only serp cars with the air con have a different length belt. Personally, I used a belt a little shorter than standard (7PK 1850) to lift the belt tensioner a fraction further away from the exhaust manifold.
Would the belt be at the wrong angle for the other pulleys and compromise the belt run if you miss this section out?
Would the belt be at the wrong angle for the other pulleys and compromise the belt run if you miss this section out?
Gassing Station | Chimaera | Top of Page | What's New | My Stuff