Door an ignition lock for ´78 Taimar

Door an ignition lock for ´78 Taimar

Author
Discussion

Rasmus

Original Poster:

2 posts

99 months

Sunday 18th October 2020
quotequote all
Hi,
someone tried to steal my car, and in that process they destroyed the barrel on the driver-side (LHD) and the Ignition lock.




Any ideas where I can get replacements?

Rasmus

markymarkthree

2,267 posts

171 months

Sunday 18th October 2020
quotequote all
Door looks like MK3 Cortina & Mk2 Escort, if its more than 8" long then poss Granada.

GAjon

3,734 posts

213 months

Sunday 18th October 2020
quotequote all
Can’t help with the locks sorry, but just wanted to say bds!

Edited by GAjon on Sunday 18th October 10:47

plasticpig1972

202 posts

46 months

Tuesday 20th October 2020
quotequote all
I would think you can just fit a new Barrel in the Handle and same for the Ignition Switch
Alan

millwap

19 posts

202 months

Wednesday 28th October 2020
quotequote all
On my 1979 Taimar, the door locks are keyed differently to the ignition barrel. I assume that it's always been like that from the factory.

Door locks are Ford - as others have noted, Capri/ Granada

Ignition barrel (and ignition lock) is Triumph. From memory, "Late" 1500 Spitfire, or possibly TR7 too for the whole lock unit for my 79 model. Early Spitfire and I think TR6 don't mount the same way physically and hence can't be used.

I replaced my ignition lock some years back due to a key snapping off in the lock. I drilled out the "sheer bolts" and removed the whole unit, then refitted with a new unit and new bolts. I seem to recall that there were 2 different units which would physically fit. One had an extra electrical "tab" underneath, and the other didn't. I can't remember if one was Spitfire and the other TR7, but I expect that I chose whichever one was cheapest at the time!