Larger diameter clutch slave.

[hoofa]

SILICONEKID 357HP said:

If the original flywheel is reused ,does it have to be fitted in exactly the same place ?

Yes as it will still use the flywheel bolts, what gets drilled daz is the holes for the covers. Mine went back to v8 dev who had it drilled for the McLeod clutch

[Classic Chim]

hoofa said:

Yes as it will still use the flywheel bolts, what gets drilled daz is the holes for the covers. Mine went back to v8 dev who had it drilled for the McLeod clutch

Surely any competent engine man could mount the clutch to your flywheel.

[SILICONEKID 357HP]

SILICONEKID 357HP said:

Are you saying the flywheel doesnt get drilled ?

The holes drilled must have to be perfect .

It would be a total disater if they were drilled slightly out .

Edited by SILICONEKID 357HP on Saturday 20th February 23:14

[hoofa]

Daz you can reuse your flywheel why change what is already there and works , buy the clutch and give it to rob at v8 dev to fit or some other trusting garage

The end job done

[SILICONEKID 357HP]

hoofa said:

Daz you can reuse your flywheel why change what is already there and works , buy the clutch and give it to rob at v8 dev to fit or some other trusting garage

The end job done

Thanks for your help ,is this the correct number ?
6913-02

[wuckfitracing]

hoofa said:

Yes as it will still use the flywheel bolts, what gets drilled daz is the holes for the covers. Mine went back to v8 dev who had it drilled for the McLeod clutch

And the flywheel only fits on one way as the holes in it, to bolt it on are not equally spaced.

[SILICONEKID 357HP]

hoofa said:

Daz you can reuse your flywheel why change what is already there and works , buy the clutch and give it to rob at v8 dev to fit or some other trusting garage

The end job done

Can you confirm the part number ?

[hoofa]

Sorry daz I don’t know them , at the time I ordered from real steel

[phazed]

Just called Real Steel. They will give you the correct parts and numbers as required.

[Zener]

SILICONEKID 357HP said:

If the original flywheel is reused ,does it have to be fitted in exactly the same place ?

Bolt pattern is staggered Daz so FW only fits one way to crank