Up up and away

[jojackson4]

Zener said:

Little non hard setting locking compound on sump pick-up bolts Peter

Too late

But they are 1 1/2 grunts tight

[EddyP]

jojackson4 said:

That’s the one


Yes new clutch but struggling to get a pressure plate as my forks are trash

I sent my original 500 AP clutch off for a refurbishment, they replaced the friction material, and then put a new pressure plate inside the original pressing and new springs, was about £250 if I remember right, very reasonable compared to other options as you won't find an original AP pressure plate.
CG Motorsport in Leeds.
I haven't driven mine properly since it was done, just moved it in and out the garage, I'd say it's slightly lighter than the original.

[jojackson4]

EddyP said:

I sent my original 500 AP clutch off for a refurbishment, they replaced the friction material, and then put a new pressure plate inside the original pressing and new springs, was about £250 if I remember right, very reasonable compared to other options as you won't find an original AP pressure plate.
CG Motorsport in Leeds.
I haven't driven mine properly since it was done, just moved it in and out the garage, I'd say it's slightly lighter than the original.

All ready been there and he says it can’t be repaired

[phazed]

McLoed twin plate to future proof the car?

Lovely light clutch and takes 800 bhp…..

[jojackson4]

Had to do it

[Granturadriver]

Looks great. I can‘t wait to see that back in your engine bay! Good job!

[Classic Chim]

It’s alright I suppose
Awesome job. Those old shells were ok I see. Even after thrashing the crap out of it trying to beat me they are not bad
I really like that blue colour.



When’s the Chassis coming back.

[jojackson4]

Classic Chim said:

It’s alright I suppose
Awesome job. Those old shells were ok I see. Even after thrashing the crap out of it trying to beat me they are not bad
I really like that blue colour.



When’s the Chassis coming back.

Hopefully get the call this week
But it’s done when it’s done

[EddyP]

jojackson4 said:

All ready been there and he says it can’t be repaired

Amazed at that as they did mine only last year with exactly the same problem as you!

[Classic Chim]

jojackson4 said:

Hopefully get the call this week
But it’s done when it’s done

Yeah no sweat.I just love the look of them when it’s all new lol

[jojackson4]

EddyP said:

Amazed at that as they did mine only last year with exactly the same problem as you!

May not have any bits for them

[jojackson4]

And finally a clutch

[Mattiegk]

Looks awesome, Definitely giving me some inspiration that i could do mine myself and spend the change from a 10k garage job on extra goodies.
Are you doing this with pure skill and years of acquired knowledge or the help of guides?
will be following along :-)

[jojackson4]

Mattiegk said:

Looks awesome, Definitely giving me some inspiration that i could do mine myself and spend the change from a 10k garage job on extra goodies.
Are you doing this with pure skill and years of acquired knowledge or the help of guides?
will be following along :-)

Common sense
Asking the right people and years of reading posts on here
The asking the right people is the most important one

[jojackson4]

It’s got 2 more coats to do tonight and I can have it back

[jojackson4]

Now the fun starts

[jojackson4]

Diff in
What a pain in the ass

[kris450]

jojackson4 said:

Diff in
What a pain in the ass

Thats just made me shudder remembering what it was like putting mine back in. Proper ball-ache isn't it

Looking good !!

[jojackson4]

kris450 said:

Thats just made me shudder remembering what it was like putting mine back in. Proper ball-ache isn't it

Looking good !!

God knows how I did it with the body on
Mind you there was little care for the chassis then

[jojackson4]

Big bits on