Up up and away
Discussion
Just a little thought while you have the chassis as is, why don't you renew the pinion oil seal on the rack.
It may have not been leaking before, but odds on it will in the future.
For the sake of £10 and the ease of access you now have it will be worth it.
Once the body is back on its a pain in the a#se to remove the steering rack.
I would suggest if you don't have one making a little dust cover to fit over the pinion, this helps to protect the seal.
It may have not been leaking before, but odds on it will in the future.
For the sake of £10 and the ease of access you now have it will be worth it.
Once the body is back on its a pain in the a#se to remove the steering rack.
I would suggest if you don't have one making a little dust cover to fit over the pinion, this helps to protect the seal.
TJC46 said:
Just a little thought while you have the chassis as is, why don't you renew the pinion oil seal on the rack.
It may have not been leaking before, but odds on it will in the future.
For the sake of £10 and the ease of access you now have it will be worth it.
Once the body is back on its a pain in the a#se to remove the steering rack.
I would suggest if you don't have one making a little dust cover to fit over the pinion, this helps to protect the seal.
Where do you get them from?It may have not been leaking before, but odds on it will in the future.
For the sake of £10 and the ease of access you now have it will be worth it.
Once the body is back on its a pain in the a#se to remove the steering rack.
I would suggest if you don't have one making a little dust cover to fit over the pinion, this helps to protect the seal.
The dust cover is just a homemade plastic cap about 44mm inside dia. to fit over the shoulder on the rack.
The dia. of the pinion hole in the centre is 20mm. This is a pic of my first attempt but the 20mm dia hole is not in the centre so i made a 2nd more
successful attempt and thats whats on the car now.
The dia. of the pinion hole in the centre is 20mm. This is a pic of my first attempt but the 20mm dia hole is not in the centre so i made a 2nd more
successful attempt and thats whats on the car now.
Gassing Station | Chimaera | Top of Page | What's New | My Stuff